Subscribe to Our Youtube Channel
Summary of Contents for Skyworth F701202ND
- Page 1 User Manual Fully Automatic Front Loading Washing Machine Model： F701202ND F751202ND...
- Page 2 Accord with the noise limit stipulated by GB19606. The procedures of energy efficiency test are default programs Half loading/Full Loading The process of energy test is as below: F701202ND/F751202ND Standard Wash( without soak function)+ Intensive+ rinse 2 times+ water temperature 40℃+ Spin Speed 400...
- Page 3 Troubleshooting guide Safety Notifications (Please Must Follow) Model: F651003S\F751203N In order to prevent the harm or damage to the user or the person and check points solutions Phenomenon property of others, please make sure to follow the safety issues. Check if press the power button or Press the power button or start/ start/pause button? pause button.
- Page 4 Part name Non-fault conditions Attachment specification he program is running. The door can't There are clothes between the door and open. water supply hose universal joint door seals. Instruction installation instruction wrench There may be a smell of rubber because There is an odor.
- Page 5 Installation instruction 3.Notes When put big and small clothes together, put the big first and they Make sure the temperature of the places where the washer is installed have to be less than half of total clothes. Please don't wash single or placed above 0℃...
- Page 6 Push"Start/Pause"button to start the washing machine, it is normal to hear Requires for positions "Clicking" sound, which is door locking sound not an error. If it occurs"dE" Horizontal adjustment: warnings, please use hand to push and shut the door. Push two times of The slant angle should be less than 1 degree.
- Page 7 6. Drum clean: The program of drum clean is use the high water level, high Washers should be connected with water inlet. Please use water temperature, high speed to clean the drum and kill the bacteria. The attached new plumbing rather than the old. detailed operations ways, please take reference of Page 18.
- Page 8 Function Introduction of Operating Panel Take Off the Inlet Pipe: Press down the Install the inlet pipes, please insert it up retaining ring of the inlet pipe. into the connector,then undo the retaining ring. Make sure Retaining the retaining Retaining ring ring on the ring...
- Page 9 Maintenance Wash tub pipe holder When washing machine is frozen wire harness 1.Cover stopcock and the universal coupling with hot towel. 2.ake off the inlet pipe, and put it into 50 degree water. 3.Pour into the drum about 2-3L of 50 degree water. 4.Connect inlet pipe, turn on the stopcock and start the washing the instruction of installation of pipe machine, please check whether inlet and outlet is normal.
- Page 10 Methods of Door Lock and Remove Maintenance DOOR LOCK Please maintenance washing machine to extend service life. After operating,the door will be locked automatically and Before maintenance, please unplug. “DOO LOCK” light/picture on the panel is lighting. Body of washing machine The Clearance of Remove Door Lock After washing, please clean it with soft...
- Page 11 Model :F701202ND/F751202ND Function Introduction of Operating Panel(One) Temperature Rinse Spin Speed Max.Load Soak Program Wash options (Run/Min.) Time(m) Cloth Materials (℃) (times) (Kg) (Additional) 1000(0, 40℃(cold, Stardard Normal Cotton Cotton(Saving (1,2, 400,800, 30℃,60℃, Rated /Cotton Fabric time,Intenstive) 96℃) 4,5) 1200) 1000(0, 30℃(cold,...
- Page 12 Child Lock Lamp The introduction for single spinning program To avoid the children wrongly operations The machine will not wash and rinse, only spin. If you want to start child lock function, you should push prewash buttonfor 3 1. preparation for washing seconds during the running process of washing machine.
- Page 13 The introduction of function and program If you want to change the current setting during the process of washing, please firstly push"Start/Pause" button to stop the operation, Usage of routine clothes then to reset different programs. This mode can not adjust the temperature, spin speed and rinse 1.Preparations times, but can adjust the washing time.
- Page 14 Cotton Program Introduction Baby Care Function This program is to wash infant clothing, allergy people clothing and clothing This program is suitable for the clothes which are moderate or mild dirty, need high temperature bacteria suppression mite. like cotton, beddings, underwear, towels and shirt, etc… 1.Prepare for washing 1.Preparation for washing Open the door, put the clothes then close the door.
- Page 15 Synthetic Program Introduction Mix Washing Function This function can be used to wash mix clothes like cotton,synthetic and To wash the synthetic clothes so on (please do not mix wash the clothes that easily rub off. 1.Preparation for washing 1.Prepare for washing Open the door, put the clothes then close the door.
- Page 16 4.Push “Start/Pause “button to start washing Put the clothes in the washing drum properly and uniform when 5.When the program ends, it will have a hum sound. spining, in order to avoid large vibration and drying time may be extended. If you want to change the current setting during the process of Heavy clothes can not be entanglement, need to put inside the washing, please push “Start/Pause”...
Need help?
Do you have a question about the F701202ND and is the answer not in the manual?
Questions and answers