Specification; Application Range; Requirement For Test; General Specification - LG 22LN4000 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.

1. Application range

This spec sheet is applied to the 22" LED TV used LM91N
chassis.

2. Requirement for Test

Each part is tested as below without special appointment.
1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C
2) Relative Humidity: 65 % ± 10 %
3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.

4. General Specification

No. Item
1. Market
2. Broadcasting system
Available Channel
3.
(Revision 21: 10.12.08)
4. Receiving system
5. CVBS Input (1EA)
6. RGB Input
7. Audio Input (1EA)
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes

SPECIFICATION

Specification
NON EU
PAL B/G/DK,/I,
NTSC-M
BAND PAL
VHF/UHF C1~C69
CATV S1~S41
Upper Heterodyne
PAL, SECAM, NTSC
RGB-PC
CVBS
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC
NTSC
2~78 VHF/UHF
1~71 CATV
4 System(Rear) :PAL50, SECAM, NTSC, PAL60
Analog (D-SUB 15Pin)
L/R Input
- 6 -
Remarks
China(DK) Australia(BG)
C1~C62 C1~C75
S1~S41 S2~S44
LGE Internal Use Only