Windows Vista Setup - D-Link dap-1522 Quick Installation Manual

Note: If you are using AP mode, please see the manual for more information on AP
mode setup.
1. On your PC, open the Windows
Click on "Network".
Note: Connect the DAP-1522 to the router or PC
with an Ethernet cable, and make sure to set up
your IP address to 192.168.0.xxx and subnet to
255.255.255.0 on your PC first.
2. Click on the icon labeled "DAP-1522".
3. You will be prompted to enter a PIN. The PIN is located on a label under
D-Link DAP-1522 Quick Install Guide

Windows Vista Setup

menu.
®