Setting The Flash Mode - Nikon COOLPIX P90 User Manual

Setting the Flash Mode

1
Press the m (flash pop-up) button.
The built-in flash will be raised.
• When the built-in flash is lowered, the flash mode will be fixed to W (off ).
2
Press m (flash mode).
• The flash mode menu is displayed.
3
Use the multi selector to choose the desired
mode and press the k button.
• The icon for the selected flash mode is displayed at the
top of the monitor.
• When U (auto) is applied, D is only displayed for
a few seconds even if monitor indicators (A15) are
turned on.
• If a setting is not applied by pressing the k button
within a few seconds, the selection will be cancelled.
B
Lowering the Built-in Flash
When not using the built-in flash, gently push to lower the flash until
it clicks shut (A7).
Using the Flash
Flash mode
16 16 16
1/125 1/125 1/125 F2.8 F2.8 F2.8
33