ION patio mate Quick Start Manual page 4

Safety Instructions: Read and follow these instructions, heed all warnings, and keep this
document in a safe place for future reference. Clean only with dry cloth. Refer all servicing to
qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped. Connect this product to a power supply only of the type described in these
operating instructions, or as marked on the unit. Keep this product away from direct contact with
liquids. The apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
Caution: To reduce the risk of electric shock, do not remove any cover. No user-serviceable parts
inside. Refer servicing to qualified service personnel only.
Notice Concerning FCC Regulations: You are cautioned that changes or modifications not
expressly approved by the part responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures: (a) reorient or relocate the receiving antenna; (b) move this unit; (c) increase the
separation between the equipment and receiver; (d) connect the equipment into an outlet on a
circuit different from that to which the receiver is connected; (e) be sure that all cables are properly
shielded, using a choke or ferrite where appropriate; (f) consult the dealer or an experienced
radio/television technician for help.
4