Software Setup; Software Installation; Configuration; Direct Configuration - Jabra Noise Guide Manual

Sound level meter
Hide thumbs Also See for Noise Guide:
Table of Contents

Advertisement

SOFTWARE INSTALLATION

Please find the software on the included USB key.
When you have installed the software, make sure to check for software updates to ensure that you are always updated
with the latest version. Read more about this in the chapter "About Noise Guide" p. 16.

CONFIGURATION

There are 2 ways of saving your configurations:
1.
Connect the device directly to your PC while performing the configuration.
2.
Uploading your configuration to the USB-key.

1. DIRECT CONFIGURATION:

Connect the device directly to your PC. Click "Configure" every time you have changed settings. This way, your set-
tings will be saved directly on the device.

2. EXPORT SETUP TO USB:

Exporting the configuration to the USB-key is useful if you need to apply the same settings to multiple devices.
6. Connect the device to a power source and insert the USB-key. The Ear symbol will light green for approx. 5
seconds to indicate that your configuration has been exported successfully.
N O I S E G U I D E – M A N U A L

SOFTWARE SETUP

1. Insert the included USB-key.
2. Choose your settings.
3. Click "Export Setup to USB".
4. Save your settings to the USB-key and click "OK".
5. The pop-up window confirms that you have saved your
configuration successfully.
R E T U R N T O " TA B L E O F C O N T E N T S "
9

Advertisement

Table of Contents
loading

Table of Contents