Advertisement
1、 IN5V： Standard USB interface， input voltage is 5V for 1S lipo battery with charging
current 800.
2、 CHG： Charging indicator, red light for charging, green light for charging completed,
flashing light for battery failure.
3、POWER：Switch button
1)Turn On：Turn on the goggles by 2 second press, and you will see the picture below:
The LOGO will disappear after 5 seconds, and will disappear immediately with a short
press on Power Button
2)Turn Off: Long press the switch button, when the progress bar comes to full grid,
the goggles shut down.
Notes：
1)In order to protect the battery, please charge in time when the
goggles in low battery status;
2)The goggles have electric consumption when under standby mode,
please pull out the plug in case battery over-discharged.
4.MENU button，single press jump to next menu, below is the sequence
1)
Brightness，UP button to increase and DN to reduce the brightness when this
Advertisement
