Important Safeguards When using electrical appliances, in order to reduce the risk of fire, electrical shock, and / or injury to persons, basic safety precautions should always be followed, including the following: Tie this blanket securely to the bed. ...
Page 3
The blanket must not be used over or under a waterbed. It is recommended that a qualified and registered person inspect your electric blanket after each 3 years of use. When storing, fold neatly but not tightly (or roll) in the original packaging without sharp bends in the heating element and store where no other objects will be placed upon it.
Page 4
Operation & Controls The control has Braille markings, which allows for easy temperature adjustment in the dark. The settings are: Gentle Heat ● Medium Heat ●● Pre-heat - this setting is recommended for Pre-heating the bed 1 to 2 hours before use with ●●●...
Spot Cleaning Sponge the affected area using a luke warm neutral detergent or mild soapy solution. Follow this with a sponging using a clean water solution. Remove any excess water by compressing the wet area between absorbent towels. Machine Washing Immerse the blanket only (DO NOT ALLOW THE CONTROLLER TO COME IN CONTACT WITH ANY WET SOLUTION) in luke warm neutral detergent or mild soapy solution for 15 minutes, ensure the water temperature is lower than 40℃.Then wash in the washing machine for 2 minutes at low temperature on a...
Page 6
For spare parts please call 0161 235 5005 Opening times: Monday - Friday 9am until 5pm Revision 1 This symbol is known as the 'Crossed-out wheelie bin Symbol'. W hen this symbol is marked on products, it means that the products should not be disposed of with your general household waste.
Need help?
Do you have a question about the GSEB1 and is the answer not in the manual?
Questions and answers