Download Print this page
CVS KD-2220 Instruction Manual

CVS KD-2220 Instruction Manual

Digital temple thermometer

Advertisement

INSTRUCTION
MANUAL
Digital Temple
Thermometer
Model KD-2220
0 1 9 7
IMPORTANT !
Read instruction manual
before using themometer
Contents
I
m
p
r o
a t
t n
T
h
n i
g
s
o t
K
n
o
w
...
..................2
Parts Identification...........................4
Preparation for Use.........................5
How to Operate the
Thermometer...................................6
Memory Mode..................................8
Cleaning and Care..........................10
Troubleshooting and Special
Indications.....................................11
Specifications ...............................1 2
Limited Warranty...........................13
FCC Statement..............................14
Quick Start
1. Install batteries into the thermometer making
sure the polarity is correct.
2. Press and release the POWER button. Unit
will beep once. Wait until it beeps again
twice and only °F shows in the display.
Do not place the probe to the temple before the
2 beeps or while the hour glass is still displayed
3. Place and hold the thermometer probe
firmly to the skin at the temple, wait several
seconds for the device to beep once more.
Once you place the probe to the temple, there is
no need to press the POWER button again. Doing
so will turn the unit off.
4. Read the temperature on the display.
POWER SOURCE
SIZE AAA 1.5V x 2 (included)
WARRANTY:
ONE YEAR FROM THE DATE OF PURCHASE
(excluding batteries)
1
Important Things to Know
1. Use the thermometer to measure your
temple temperature only, the area be-
tween the outer corner of the eye and
the hairline, over the temporal artery.
2. Do not place the thermometer on
scarred tissue, open sores or
abrasions.
3. Using drug therapies can raise skin
temperature, which may lead to
incorrect measurements.
4. Do not dismantle the unit except to
replace the batteries.
5. Children should not use the ther-
mometer without adult supervision.
6. Do not drop or expose thermometer
to electric shock as this may adversely
affect its performance.
7. The thermometer is not waterproof.
Do not immerse it in water or liquid of
any kind.
8. To ensure correct readings, wait at
least 2 minutes between continuous
measurements for the thermometer
to return to room temperature.
9. Do not use the thermometer around
flammable materials.
10. Stop using the thermometer if
malfunctions appear or if it operates
abnormally.
11. Clean the thermometer probe after
each measurement.
12. Do not take a measurement if the
temple area has just been exposed
2
Important Things to Know
to direct sunlight, fireplace heat or air
conditioner flow, as this may lead to
incorrect readings.
13. If thermometer has been kept or
stored in a cold temperature, please
wait at least 1 hour for it to return to
room temperature before measuring.
14. Performance of the thermometer may
be degraded if the unit is operated or
stored outside the stated temperature
or humidity ranges, or if the patient's
temperature is below room temp.
15. Body temperature, like blood pressure,
varies from person to person. During
the day, it can range from 95.9°F to
100.0°F (35.5 to 37.8°C). For some
people there can be a difference be-
tween their temple and body temp.
We recommend learning what your
normal temple temperature is while
healthy so you can detect an elevated
one when you become ill. For
accuracy, be sure to measure the
same area of the temple each time.
16. Avoid taking a measurement for at
least 30 minutes after physical
exercise, bathing or eating.
17. Make sure the temporal area is dry
and clean of sweat, make-up, etc.
18. The device is intended for consumer
use only.
19. Calibration is recommended every
two years.
3

Advertisement

loading

Summary of Contents for CVS KD-2220

  • Page 1 17. Make sure the temporal area is dry 4. Read the temperature on the display. malfunctions appear or if it operates and clean of sweat, make-up, etc. Model KD-2220 abnormally. POWER SOURCE 18. The device is intended for consumer 11. Clean the thermometer probe after SIZE AAA 1.5V x 2 (included)
  • Page 2: Parts Identification

    How to Operate the How to Operate the Preparation for Use Parts Identification thermometer thermometer 3. Install 2 new "AAA" batteries into the 7. Once the measurement is done, you will 1. Press the POWER button to turn on POWER Probe battery compartment matching hear 2 beeps indicating the reading has...
  • Page 3: Memory Mode

    Memory Mode Memory Mode Cleaning and Care Troubleshooting Memory Mode Deleting Memories: Recalling Memories: Message Instruction Do not drop the unit or If you choose to delete memories on the 1. Begin with the unit turned off. The temperature expose to heavy or electric thermometer, this may be done after 2.
  • Page 4: Specifications

    REV.20160525 P/N 8222200014...