Olympus FCON-T01 Instructions Manual page 4

INSTRUCTIONS
EN
Mounting lens parts
Refer to the instruction manual of your camera.
Notes on Using
• When using a flash, the shadow of the lens
may appear in images or the periphery of the
display may darken.
• The functions of the lens including AF, AE
and IS may not show their true operation or
performance in some conditions of use.
• It is recommended to use the special setting
for those lens.
• Be sure to wash any foreign materials and
salts by fresh water.
• Do not use chemicals for cleaning.
Main specifications
Magnification
Weight (Excluding the cap)
Dimensions (Max. dia. × Overall length)
Water resistance
Dust resistance
Use/Storage temperature
Specifications are subject to change without any notice or obligation on the part of the manufacturer.
For additional information visit: http://www.olympus.com/
4
EN
Precautions: Be Sure to Read the Following
• Do not directly view the sun through the lens.
• Do not leave the lens without the cap. If solar
• Do not point the camera lens at the sun.
FCON-T01
0.74x
125 g (4.4 oz.)
Ø 65 (2.6 in.) × 27.2 mm (1.1 in.)
Equivalent to IEC Standard publication 529 IPX8 (under OLYMPUS test conditions)
Available in 20 m (65.6 feet) deep water/Within 60 minutes
IEC Standard publication 529 IP6X (under OLYMPUS test conditions)
-10°C to 40°C (14 °F to 104 °F)
Warnings: Safety Precautions
It may cause blindness or vision impairment.
light is converged through the lens, a fire may
result.
Sunlight will converge in the lens and focus
inside the camera, possibly causing a
malfunction or fire.
TCON-T01
1.7x
94 g (3.3 oz.)
Ø 46.2 (1.8 in.) × 43.3 mm (1.7 in.)