Controlling Other Components; Entering Remote Control Codes - Onkyo HT-R640 Instruction Manual

Controlling Other Components

You can use the AV receiver's remote controller
(RC-651M) to control your other AV components,
including those made by other manufacturers. This sec-
tion explains how to enter the necessary remote control
code for the component that you want to control (e.g.,
DVD player, TV, or VCR).

Entering Remote Control Codes

To control another component, you must first enter the
appropriate remote control code to a REMOTE MODE
button. You'll need to enter a code for each component
that you want to control.
RECEIVER
or AMP
Number
buttons
DISPLAY
1
Look up the appropriate remote
control code in the separate
Remote Control Codes list.
The codes are organized by category
(e.g., DVD player, TV, etc.).
72
STANDBY/ON
REMOTE MODE
RECEIVER DVD
TAPE/AMP
INPUT SELECTOR M D/CDR
C D
1 2 3
HDD
V 1 V 2 V 3
REMOTE
TV
4 5 6
MODE
V 4 MULTI CH DVD
7 8 9 VCR
TAPE TUNER C D
CABLE
10 11 12
+ 10
0
CLR SAT
D TUN ENT
--/--- DIMMER SLEEP
CH
T V VOL VOL
DISC
ALBUM
INPUT
GUIDE PREVIOUS
TOP MENU MENU
MUTING
ENTER
PLAYLIST/CAT PLAYLIST/CAT
RETURN SETUP
LISTENING MODE
STEREO SURROUND
AUDIO SUBTITLE RANDOM REPEAT
LEVEL - LEVEL +
TEST TONE CH SEL
PLAY MODE
L NIGHT
DISPLAY AUDYSSEY L NIGHT CINE FLTR
VCR DVD HDD
RC- 668 M
2
While holding down the REMOTE
MODE button that you want to
REMOTE MODE
set, press the [DISPLAY] button
DVD
for 3 seconds.
M D/CDR
The REMOTE MODE button lights up.
C D
HDD
T V
VCR
CABLE
SAT
DISPLAY
3
Within 30 seconds, use the num-
ber buttons to enter the 4-digit
remote control code.
1 2 3
V 1 V 2 V 3
The REMOTE MODE button flashes
4 5 6
twice.
V 4 MULTI CH DVD
7 8 9
TAPE TUNER C D
11
0
DIMMER
4 Press the REMOTE MODE button
again to select the remote con-
troller mode, point the remote
controller at the component, and
check the operation.
If the remote controller doesn't work as
expected, and several remote codes are
listed, try each one in turn and use the
one that works best.
Notes:
• A remote control code cannot be entered for the
[RECEIVER] or [AMP] REMOTE MODE button.
• The remote control codes provided are correct at the
time of printing, but are subject to change.