Removing The Machine From Storage - Toro Super Bagger 20897 Operator's Manual

G020809
Forward Position
1. With the handle in the upright position, step on the
foot pedal and hold it down.
2. Move the handle all the way forward and loosen the
upper handle knob (Figure 50).
3. To unfold the handle, refer to
1 Unfolding the Handle (page 5).
Figure 49
Figure 50
Removing the Machine from
Storage
1. Check and tighten all fasteners.
2. Remove the spark plug and spin the engine rapidly
using the starter to blow excess oil from the cylinder.
3. Install the spark plug and tighten it with a torque
wrench to 20 N-m (15 ft-lb).
4. Perform any needed maintenance procedures; refer to
Preparing for Maintenance (page 15).
5. Check the engine oil level; refer to
Checking the Engine Oil Level (page 9).
6. Fill the fuel tank with fresh gasoline; refer to
Filling the Fuel Tank (page 9).
7. Connect the wire to the spark plug.
21