Automatic Locking - BMW ACTIVE HYBRID 5 Owner's Manual

Hide thumbs Also See for ACTIVE HYBRID 5:
Table of Contents

Advertisement

Otherwise, the trunk lid may be opened inad‐
vertently, for example by an unintentional or
misinterpreted movement of the foot.◀
Closing
The hazard warning system flashes on and an
acoustic signal sounds before the trunk lid
closes.
During closing, the trunk lid pivots back and
down.
The closing of the trunk lid has no effect on the
locking of the vehicle.
Another foot movement can interrupt the clos‐
ing operation.
Keep the closing path clear
Make sure that the closing path of the
trunk lid is clear; otherwise, injuries may re‐
sult.◀
Do not place the remote control in the
cargo area
Take the remote control with you and do not
leave it in the cargo area; otherwise, the re‐
mote control is locked inside the vehicle when
the trunk lid is closed.◀
Malfunction
Comfort Access may not function properly if it
experiences interference from external sour‐
ces such as mobile phones, metal objects,
overhead power lines, transmission towers,
etc.
In this case, open or close the vehicle using the
buttons on the remote control or use the
integrated key in the door lock.
If there is a malfunction, open the trunk lid with
the remote control button or with the button on
the trunk lid.
Online Edition for Part no. 01 40 2 909 978 - VI/13
Opening and closing
Adjusting
Unlocking
The setting is stored for the remote control
currently in use.
1.
"Settings"
2.
"Doors/key"
3.
Select symbol or "Unlock button:"
4.
Select the desired function:
"Driver's door only"
Only the driver's door and the fuel filler
flap are unlocked. Pressing again un‐
locks the entire vehicle.
"All doors"
The entire vehicle is unlocked.
Depending on how the vehicle is equipped or
the country-specific variant, you can set
whether the doors are also unlocked with the
button on the remote control.
Confirmation signals from the vehicle
1.
"Settings"
2.
"Doors/key"
3.
Deactivate or activate the desired confir‐
mation signals.
"Acoustic sig. lock/unlock"
"Flash when lock/unlock"

Automatic locking

The setting is stored for the remote control
currently in use.
1.
"Settings"
2.
"Doors/key"
3.
Select the desired function:
"Lock if no door opened"
The vehicle locks automatically after a
short period of time if a door is not
opened.
"Lock after start driving"
Controls
45

Advertisement

Table of Contents
loading

Table of Contents