Table of Contents
Advertisement
2. Basic operation
2.1 Install battery
Press / slide down the Battery Cover and insert the lithium battery. Align
with correct polarity of battery terminals. Replace the Battery Cover.
2.2 Charge Battery
1. Turn off the camera.
2. Connect the camera, via the built in USB port, to the computer's USB
port or a power adapter
3. During charging, Status LED is on and turns off when charging is
complete.
2.3 Use SD/MMC/SDHC card
Turn your camcorder OFF before inserting / removing the SD Card.
Insert a Memory card into the SD/MCC Card Slot. Push it down until the
card stays latched.
Push and release the inserted card if you wish to remove or replace the
card.
2.4 Power on/off
When off, press and hold the power key to power
on the camera. When on, press the power key
to turn off the camera.
When on, allow the camera to idle for 1 minute
to power off the camera automatically
When battery level is very low, the camera will
turn off after several seconds. You must
recharge the batteries.
Digital Camera
5
Advertisement
Table of Contents
