Table of Contents
Advertisement
Configure bulb.
Step 4 - Configure Bulb
In the following step, you will configure each Philips
Hue bulb.
To configure each Hue bulb...
1 - Select a bulb to configure and press OK. The
bulb you selected is flashing.
2 - Select Start and press OK.
3 - First indicate where you placed the bulb relative
to the TV. A correct setting of the Angle will send the
correct Ambilight colour to the bulb. Select the slider
bar to adjust the position.
4 - Secondly, indicate the Distance between the
bulb and the TV. The further away from the TV, the
weaker the Ambilight colour. Select the slider bar to
adjust the distance.
5 - Finally, set the Brightness of the bulb. Select the
slider bar to adjust the brightness.
6 - To stop configuring this bulb, select OK and
press OK.
7 - In the Configure Ambilight+hue menu, you can do
the same for each bulb.
8 - When all Ambilight+hue bulbs are configured,
select Finish and press OK.
Ambilight+hue is ready for use.
Switch On or Off
You can switch off the Ambilight+hue effect on the
bulbs. The bulbs will light up white.
To switch off Ambilight+hue...
1 - Press SETTINGS, select Ambilight+hue and
press OK.
2 - Select Off or On and press OK.
3 - Press (left) to go back one step or press
BACK to close the menu.
Immersion
You can adjust the level of the Ambilight effect for the
Ambilight+hue bulbs.
To adjust the Ambilight+hue Immersion...
1 - Press SETTINGS, select All Settings and
press OK.
2 - Select Ambilight > Ambilight+hue and press OK.
3 - Select Immersion and press (right).
4 - Press (up) or (down) to adjust the value.
5 - Press (left) to go back one step or press
BACK to close the menu.
View Configuration
In View configuration, you can consult the current
Ambilight+hue configuration. Which network you use,
how many bulbs are connected, etc.
To view the current Ambilight+hue setup...
1 - Press SETTINGS, select All Settings and
press OK.
2 - Select Ambilight > Ambilight+hue and press OK.
3 - Select View Configuration and press OK.
4 - Press (left) to go back one step or press
BACK to close the menu.
Reset Configuration
You can reset (uninstall) the complete Ambilight+hue
configuration in one go.
To reset the Ambilight+hue configuration...
1 - Press SETTINGS, select All Settings and
press OK.
2 - Select Ambilight > Ambilight+hue and press OK.
3 - Select Reset Configuration and press OK. The
configuration is reset.
4 - Press (left) to go back one step or press
BACK to close the menu.
Lounge Light
With the TV on standby, you can switch on Lounge
Light. Lounge Light is Ambilight without video. You
can also switch on Lounge Light when the TV is
switched on but the screen is switched off to save
energy — like when you are listening to a radio
station.
Standby
With the TV in standby, press AMBILIGHT to
switch on Lounge Light. Press again to toggle
through the different colour schemes as you can find
them in the Follow Colour menu. Press again to
switch off.
Screen Off
With the TV switched on but the TV screen switched
off, press AMBILIGHT to switch on Lounge
Light. With the AMBILIGHT key you can toggle
through the audio style set in the Follow Audio menu
or the colour scheme set in the Follow Colour
menu. Press again to switch off.
In Help, press the colour key
up Screen Off for more information on how to
switch off the screen to save energy while you are
listening to a radio station.
72
Keywords and look
Advertisement
Table of Contents
