Opel CASCADA Owner's Manual page 211

9. Insert the strap through the
spokes of the wheel as shown in
the illustration.
10. Mount the hook to the right rear
lashing eye.
11. Tighten the strap and secure it
using the buckle.
12. Deposit the floor cover on the
wheel.
13. If equipped, secure coupling ball
bar in the bag at a lashing eye in
the load compartment.
14. Fold out the load compartment
partition before opening the soft
top.
Stowing the spare wheel back in
the well after replacing the
damaged wheel
1. Close the soft top and fold in the
load compartment partition.
2. Remove floor cover, untwist and
remove wing nut and conus.
3. Stow the tools in the tool box and
the bag.
4. Place spare wheel outside up in
the well.
5. Insert and turn the excentric
conus in the recess of the spare
wheel so that the wheel is
Vehicle care
positioned as far as possible to
the front. Secure the wheel by
turning the wing nut clockwise.
6. Insert and close floor cover.
9 Warning
Storing a jack, a wheel or other
equipment in the load
compartment could cause injury if
they are not fixed properly. During
a sudden stop or a collision, loose
equipment could strike someone.
Store jack and tools always in the
respective storage compartments
and secure them by fixing.
Damaged wheel placed in the load
compartment must always be
secured by the strap.
Temporary spare wheel
Caution
The use of a spare wheel that is
smaller than the other wheels or in
combination with winter tyres
209