Table of Contents
Advertisement
1.
The Digital Weather Station comes with a Stand which can be attached to the
bottom of the Weather Station. With the larger bracket toward the back of the
Weather Station, gently snap the Stand onto the Weather Station-see Figure 4.
2.
The Digital Weather Station can also be hung on a flat surface by setting the
mounting hole on the rear of the Weather Station onto a nail or screw (not
included). When drilling, using nails or screws (hardware not included), make
certain that there are no hidden electrical lines, cables, or wires beneath the
mounting surface.
1.
BeFore each use, inspect the general condition of the Weather Station.
Check for loose screws, cracked or broken parts and any other condition that
may affect its safe operation.
2.
aFter use, clean external surfaces of the tool with a clean, moist cloth.
3.
Periodically inspect the batteries for any sign of leakage. Replace batteries in
sets of 3 pcs.
4.
Discard used batteries properly. Do not incinerate or throw batteries in fire.
please read the Following careFullY
The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference
tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer
that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of
the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements
should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and
liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or
her installation of replacement parts thereto.
SKU 96754
installing the stand
Figure 4
Maintenance and serVicing
cleaning, maintenance, and lubrication
For technical questions, please call 1-800-444-3353.
rear of Weather
Station
Stand
Page
Advertisement
Table of Contents
