Pioneer BDP-440 Operating Instructions Manual page 41

Setting
HDMI Mode (BDP-LX55)
Also refer to Setting the HDMI Mode (Only for BDP-LX55) on page 16.
Color Space
Resolution
On the BDP-LX55, no video signal is output from the HDMI OUT (MAIN) terminal when the resolution is set to 480I/576I.
HDMI Audio Out
Control
To use Sound Retriever Link, Stream Smoother Link and PQLS (pages 16 and 17), Control must be set to On.
HDMI Deep color
HDMI 1080P 24Hz
HDMI 3D
3D notice
IP setting
Proxy Server
Information
Connection test
Internet Connection
BD-Live connection
DLNA
Downloaded From DvDPlayer-Manual.com Pioneer Manuals
Options Explanation
Single Select this when an HDMI cable is connected to HDMI OUT (MAIN) terminal only.
Separate Select this when HDMI cables are connected to both HDMI OUT terminals.
Pure Audio Select this to enjoy music only with a better sound quality when devices are
connected to both HDMI output terminals. With this setting, music is output
from the HDMI OUT (SUB) terminal only, and video signals are only output
from the HDMI OUT (MAIN) terminal when DISPLAY is pressed.
RGB Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright.
YCbCr Select this to output the video signals as YCbCr 4:4:4 signals.
YCbCr 422 Select this to output the video signals as YCbCr 4:2:2 signals.
Full RGB Select this to output the video signals as RGB signals. Choose this if the colors
seem too dense and all the dark colors are displayed in a uniform black.
Auto
Select this to choose the resolution of the video signals output from the
HDMI OUT terminal automatically.
Output the video signals from the HDMI OUT terminal with the selected
480I/576I
resolution.
480P/576P
The resolution can be changed by pressing HDMI, but Auto cannot be
720P
selected.
1080I
1080P
Bitstream Select this to output HDMI audio signals directly.
PCM Select this to output HDMI audio signals converted to 2-channel audio signals.
Re-encode Select this to choose the type of audio signals automatically.
Off Select this when you do not want to output the audio signal from the HDMI
output terminal.
On Select this to control the player with the remote control of the connected AV
device using an HDMI cable. Also refer to page 16.
Off Select this when you do not want to control the player with the remote control
of the connected AV device using an HDMI cable.
30bits Select this when outputting the video signals with 30-bit color.
36bits Select this when outputting the video signals with 36-bit color.
Off Select this when outputting the video signals with normal 24-bit color.
On Select this when Resolution is set to Auto or 1080P and outputting 1080p/24
video signals to a TV compatible with 1080p/24.
Off Select this when Resolution is set to 1080P and outputting 1080p/60 video
signals to a TV compatible with 1080p/60.
Auto With 3D discs, the disc is played with 3D images.
Off Even with 3D discs, the disc is played with 2D images.
Yes This sets whether or not to display the 3D notice when playing 3D images.
No
Select this to set the IP address of the player and DNS server (page 44).
Only set the proxy server if so instructed by your Internet service provider (page 44).
Displays the values of the MAC address, IP address, subnet mask, default gateway, DNS server
(primary) and DNS server (secondary).
Select this to test the network connection (page 45).
Enable Select this when connecting to the Internet.
Disable Select this when not connecting to the Internet.
Permitted
All discs are allowed to connect to BD-LIVE.
Partial Permitted Only discs whose safety has been confirmed are allowed to connect to BD-LIVE.
Prohibited No disc is allowed to connect to BD-LIVE.
Enable Select this when connecting to DLNA server.
Disable Select this when not connecting to DLNA server.
07
41
En