Table of Contents
Advertisement
Note: The Fill Cap (14) may be used as a measuring cup. Calibrations are embossed
into the side. Use chemicals only at strengths recommended by manufacturers'
label directions.
3.
Replace the Fill Cap (14).
4.
Point the Power Spray Gun (12) toward the ground and squeeze the trigger a few
times to prime.
5.
Your Motorized Caddy Sprayer is now ready to use. Grab the handle and
move the Caddy Sprayer into position. Squeeze the Trigger on the Power
Spray Gun (12) and Spray with back and forth, or up and down motion keeping
the Power Sprayer Gun (12), and/or the Misting Nozzle (13) approximately
12 inches from what you intend to cover with the product you are using.
caution: Do not spray against the wind.
6.
When you are finished, or if you intend to switch chemicals, always clean
according to directions in "Cleaning" section on page 5 of this manual, and
following directions recommended by the manufacturer of the chemical you are
using for your project.
SKU 96622
For technical questions, please call 1-800-444-3353.
Page 8
Advertisement
Table of Contents
