Advertisement
Overview of voice alerts:
„Power on" - the device was turned on.
„Bluetooth mode. Pair the device." - The unit is in Blue-
tooth mode and is ready for pairing.
„Paired" - it has been successful paired with a Bluetooth
device.
„Radio" - the device is in FM radio mode.
„Audio imput" - The unit is in playback mode, ready to
play audio recordings from device connected via the
3.5mm jack.
„SD card" - the device is ready to play tracks from a micro
SD card.
Pairing with a Bluetooth device:
Press „M" to go to Bluetooth mode. Speaker can be paired
with a device which supports Bluetooth 2.1 or higher.
In the list of active devices the Sentinel SE-1 is displayed
as „SE-1 by LAMAX Beat".
Once paired, you will hear the notification „Paired".
If the device is disconnected or the connection is lost you
will hear „Bluetooth mode. Pair the device".
FM radio mode:
Go to mode by pressing „M".
Connect the micro USB cable, which acts as an antenna.
Advertisement
