Subscribe to Our Youtube Channel
Summary of Contents for PrehKeyTec PKT 4000
- Page 1 PKT 4000 / PKT 4000 OEM Manual PrehKeyTec GmbH Tel: +49 9776 7046-222 Scheinbergweg 10 support@prehkeytec.de D-97638 Mellrichstadt www.prehkeytec.com...
-
Page 2: Disclaimer
PrehKeyTec whether any such changes have been made. The information in this manual does not represent a commitment on the part of PrehKeyTec. Whilst every care has been taken in producing this manual PrehKeyTec shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. -
Page 3: Table Of Contents
Contents ................. 4 Installation ..............6 Installation Directory ............8 PKT 4000 Connections ............ 9 PKT 4000 Status LED’s ..........10 PKT4000 Acoustic Feedback ......... 11 Position of documents on PKT4000 ......11 Application PKT4000Reader ......... 12 SDK (Software Development Kit) ........18 Technical Data .............. -
Page 4: General
RFID chip within ePassports, providing the capture of ePassport data along with digital image information such as facial profiles etc. The connection of the PKT 4000 is via a USB interface, noting that device drivers are required in order to allow the various PKT 4000 device modules to function correctly. -
Page 5: Contents
Contents The following components are included with One PKT 4000 or PKT 4000 OEM One Power Supply with different plugs Only use external power supply type SYS 1357 – 1505 included in this package. See ISO 16016 ©PrehKeyTec GmbH 2015... - Page 6 One USB Cable Type A connector computer Type B connector PKT 4000 See ISO 16016 ©PrehKeyTec GmbH 2015 Dec 07 2015 Subject to change w/o prior notice Version 1.0...
-
Page 7: Installation
Package.zip Install PKT 4000 Package Unzip the package in a folder and run “PKT 4000 package.msi” or setup.exe and follow the instructions in the installation procedure. The installation of the PKT 4000 Package and the drivers must be carried out with administrator privileges. - Page 8 This does not mean that the installation of the driver failed nor that the smart card or its driver has not been recognized. To avoid this Windows® message, you may disable the plug & play service for smart cards. See ISO 16016 ©PrehKeyTec GmbH 2015 Dec 07 2015 Subject to change w/o prior notice Version 1.0...
-
Page 9: Installation Directory
Installation Directory The following list describes the folders of the PKT 4000 SDK. Folder Description Main folder Location of Application for settings and demonstration Documentation of installation and PKT 4000 data sheet Driver folder Location of CheckinPackage. First package to install. -
Page 10: Pkt 4000 Connections
PKT 4000 Connections The following connections and controls are placed at the rear side of the PKT 4000. Power switch Plug for external power supply. USB B upstream port to computer. USB A downstream port to connect USB device. 500 mA max. -
Page 11: Pkt 4000 Status Led's
PKT 4000 Status LED’s There are four status LED’s on the PKT 4000. The PKT 4000 makes a self-test after powering. The status LED’s turn from orange to green. If nor errors are detected all LED’s are cleared. Red: PKT 4000 powered, no USB connection, no virtual... -
Page 12: Pkt4000 Acoustic Feedback
PKT4000 Acoustic Feedback The PKT 4000 provides users with acoustic feedback and this can be controlled automatically by the PKT 4000. The settings (e. g. volume, frequency, duration etc.) of the good/bad read, can be configured via the config file. -
Page 13: Application Pkt4000Reader
OCR data conforming to ICAO, these include travel documents such as passports, ID cards and visa. Additionally 1D or 2D barcodes will be recognized. If the PKT 4000 is equipped with RFID function, the digital stored picture from ePassports is transmitted to the SDK. User can also capture pictures of the document placed on the scanning window. - Page 14 The status bar below shows the state of the device (online or offline) and additional information of the COM ports. The PKT 4000 uses two virtual COM ports. The status code is the return code of the state. The code is described in the SDK manual.
- Page 15 RFID picture of e. g. ePassport. Only available for documents with this sign. Capture picture manually by pressing this button Get information of PKT4000 (hardware details and software version) See ISO 16016 ©PrehKeyTec GmbH 2015 Dec 07 2015 Subject to change w/o prior notice...
- Page 16 The tab Barcode shows the barcode type and the raw data of the barcode. If a boarding pass was scanned, an additional dialog was complete with the barcode data according IATA Resolution 792. See ISO 16016 ©PrehKeyTec GmbH 2015 Dec 07 2015 Subject to change w/o prior notice Version 1.0...
- Page 17 Create image files and safe the file in the folder named in “Settings.xml”. The default directory is the directory of the application. See ISO 16016 ©PrehKeyTec GmbH 2015 Dec 07 2015 Subject to change w/o prior notice...
- Page 18 User can switch on or off different status LED’s of the PKT4000. This tab is only for demonstrating the LED function. The LED’s can be controlled from any user application by selecting and sending the correct commands. See ISO 16016 ©PrehKeyTec GmbH 2015 Dec 07 2015 Subject to change w/o prior notice Version 1.0...
-
Page 19: Sdk (Software Development Kit)
Source Code Error and status codes are returned from the SDK and give the state of the PKT 4000. Event handlers catch all events send from the SDK. A detailed description gives programmers an overview and easy implementation into their own source code. The SDK separate the scanned date into OCR, Barcode, pictures and MSR data. -
Page 20: Technical Data
FCC part 15, limit class A Software Development Kit (SDK) Included Libraries, services and demo application Operating systems Windows® 7, 10 (32/64 bit) See ISO 16016 ©PrehKeyTec GmbH 2015 Dec 07 2015 Subject to change w/o prior notice Version 1.0... -
Page 21: Product Guide And Ordering
Support: +49 9776 7046 222 Fax: +49 9776 7046 199 Email: support@prehkeytec.de For further assistance, consult the FAQ from Support PrehKeyTec or contact Technical Support. See ISO 16016 ©PrehKeyTec GmbH 2015 Dec 07 2015 Subject to change w/o prior notice Version 1.0...
Need help?
Do you have a question about the PKT 4000 and is the answer not in the manual?
Questions and answers