3. Press out lamp housing from the
inside of the side trim panel.
4. Rotate plastic nut anticlockwise
and remove from the bulb holder.
5. Push bulb into socket slightly,
rotate anti-clockwise, remove and
renew bulb. Insert plastic nut into
bulb holder by rotating clockwise.
Tail light (1)
Turn signal light (2)
6. Insert bulb holder into the tailgate
frame. Close cover in the side trim
panel.
Side turn signal lights
Have bulbs replaced by a workshop.
Vehicle care
Number plate light
1. Insert screwdriver in bulb
housing, press to the side and
release spring.
Back to overview
163