Table of Contents
Advertisement
MAintenAnce And
SerVicing
Procedures not specifically
explained in this manual must
be performed only by a qualified
technician.
froM AccidentAl
operAtion:
turn the power Switch of the
angle grinder off and unplug the
angle grinder from its electrical
outlet before performing any
inspection, maintenance, or
cleaning procedures.
to preVent SeriouS injury
froM tool fAilure:
do not use damaged equipment.
if abnormal noise or vibration
occurs, have the problem
corrected before further use.
1.
Before eAch uSe,
general condition of the Safety Guard.
Check for loose screws, misalignment,
broken parts, or improper mounting
of the Safety Guard, and any other
condition that may affect its safe
operation. If abnormal noise or vibration
occurs, turn off the Angle Grinder
immediately and have the problem
corrected before further use.
Do not use damaged equipment.
2.
With a brush, soft cloth, or vacuum,
remove all dust particles from the Safety
Guard.
3.
Do not use solvents to wipe off the
Safety Guard, as damage may result. If
necessary, wipe with a damp cloth. You
may use a mild detergent.
Page 6
to preVent
SeriouS injury
inspect the
for technical questions, please call 1-800-444-3353.
SKU 45921
Advertisement
Table of Contents
