Canon iP8700 series Online Manual page 169

Note
• When detecting your target access point, make sure that the access point is turned on.
3. Set
Click to set the access point's SSID in SSID: on the Wireless LAN sheet.
Note
• The WEP Details screen, the WPA Details screen, or the WPA2 Details screen appears if the
selected access point is encrypted. In this case, configure the details to use the same encryption
settings set to the access point.
• Access points that cannot be used by this machine (including those configured to use different
encryption methods) are displayed grayed out and cannot be configured.
169