Timer Function; For The Protection Of Being Recorded - Samsung MAX-DN55 Instruction Manual

Timer Function

GB
The timer enables you to switch the system on or off at spe-
cific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off auto-
matically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing On/Standby.
2
Press Timer/Clock until
3
Press Enter.
Result: ON TIME is displayed (instead of the equalizer symbols) for
4
Set the timer switch-on time.
a Set the hour by tuning the Multi Jog knob to the right or to the left.
b Press Enter.
Result: The minutes flash.
c Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d Press Enter.
Result: OFF TIME is displayed (instead of the equalizer symbols)
5
Set the timer switch-off time.
a Set the hour by tuning the Multi Jog knob to the right or to the left.
b Press Enter.
Result: The minutes flash.
c Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d Press Enter.
Result: VOL XX is displayed, where XX corresponds to the vol-
6
Press Tuning Down and Up to adjust the volume level and press
Enter.
Result: The source to be selected is displayed.
7
Turn the Multi Jog knob to select the source to be played when the
system switches on.
If you select...
TAPE (cassette)
TUNER (radio)
CD (compact disc)
8
Press Enter to confirm the timer.
9
Press On/Standby to set the system to standby mode.
Result:
38
Downloaded From Disc-Player.com Samsung Manuals
TIMER is displayed.
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
ume already set.
You must also...
Insert a recorded cassette in one of the
decks before setting the system to standby.
Enter
a Press .
b Select the FM or AM frequency band by
Multi Jog
tuning the
to the left.
c Press Enter .
d Select a preset station by tuning the
Multi Jog knob to the right or to the left.
a Load one or more compact discs.
b Select the required disc.
is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
If the timer switch on and off times are identical, the word ERROR is
displayed.
On/Standby
R
1,9
Demo
RDS
Timer
PTY Display /Clock
TUNER
Band
Mono/ST Memory
REC/Pause
REC Lock

For the Protection of being Recorded

Press REC LOCK (recording protection) button.
When REC Lock (recording protection) lamp is lighted up all
of the buttons are not activated. (Volume, Demo key is acti-
vated.)
It is a function that the recording stop is prevented by other
button action during recording.
REC Lock (recording protection) is activated only during
recording.
When the REC Lock is on (the lamp is on), do not open the
cassette door.
When releasing, press REC Lock button once again.
knob to the right or
REC Lock
es
Volume
+
2
–
DOLBY DIGITAL
DVD/CD TAPE AUX
3,4,5,6,7,8
CD Synchro Display Deck 1/2 REV. Mode
TAPE TAPE REC
Normal HI-Speed
6
6
Down Tuning Mode Up
TUNER DVD/CD TAPE
Band
Mono/ST Memory CD Synchro Display Deck 1/2
TAPE
REC/Pause Normal
Down Tuning Mode
4,5,7
REV. Mode
TAPE REC
HI-Speed
Up