Troubleshooting - Baumatic BR16.5 Instruction Manual

fix it to the opposite side of the door (certain models only).
o Remove the door from the bottom hinge.
o Unscrew the leg holder fixing screws.
o Tilt the appliance backward at a
maximum angle of 35° Unscrew the
leg support screws (C) - left and right,
and remove the leg support cover (D).
Then place it on the opposite side.
Unscrew, remove and then replace
the position of the end switch (E) and
decorative peg (F) (for models with
forced door closing system).
o Unscrew the three screws fixing the
bottom hinge and then fix the bottom
hinge on the opposite side.
o To fit the door on the opposite side of
the refrigerator proceed with the above procedure in reverse.

Troubleshooting

IMPORTANT: If your refrigerator appears not to
be operating properly, before contacting the
Baumatic Customer Care Department, please
refer to the checklist below.
My fridge does not appear to be working/there is no
power to my appliance.
o Check that the plug is fully inserted into the power socket.
o Check that there is power to your mains supply (e.g. that there
hasn't been a power cut or that the fuse hasn't blown).
o Check that the thermostat inside the appliance has not been
turned to the off position.
o Check that your mains supply voltage, corresponds to the
voltage stated on the rating plate of your appliance.
My fridge appears to be performing poorly
o Check that the appliance isn't overloaded and that food hasn't
been packed too tightly into it.
23