1. Manuals
  2. Brands
  3. GoMax Electronics Manuals
  4. Processor
  5. VW-1312
  6. User manual

GoMax Electronics VW-1312 User Manual

12-display dual-view cascadable modularized vodeowall processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
V
W
-
1
3
1
2
V
W
-
1
3
1
2
12-Display Dual-View Cascadable
Modularized Videowall Processor
User Manual
rev: 120112
Made in Taiwan

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VW-1312 and is the answer not in the manual?

Questions and answers

Summary of Contents for GoMax Electronics VW-1312

  • Page 1 12-Display Dual-View Cascadable Modularized Videowall Processor User Manual rev: 120112 Made in Taiwan...

  • Page 2: Table Of Contents

    However, like all electronic equipments, the VW-1312 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

  • Page 3: Introduction

    VW-1312 can support up to 12 DVI outputs to expand the spectrum of video wall applications. With add-on card design concept, users can therefore to adjust the number of output ports based on different scenarios.

  • Page 4: Specifications

    SPECIFICATIONS Model Name VW-1312 Technical Role of usage Video-wall processor Output displays Up to 12 HDMI / DVI / VGA / Component / S-Video / Composite Input Format Support [Only one digital and one analog can be chosen in PIP or PAP mode]...

  • Page 5: Package Contents

    You can pick up one of the digital inputs and one of the analog inputs, and then VW-1312 will display the mixed video on the connected 4 displays. With an advanced de-interlacer built in, low resolution but popular video formats such as NTSC / PAL will be improved.

  • Page 6: Supported Resolution

    SUPPORTED RESOLUTION [DVI-I IN] Socket Supported Mode Resolution Supported Mode Resolution 480p / 525p 720x483 @60Hz 832x624 @75Hz 480p (16:9) 960x483 @60Hz VESA 1024x768 @60Hz 576p / 625p 720x756 @50Hz 1024x768 @60Hz (HDTV) 720p 1280x720 @50Hz VESA 1024x768 @70Hz (HDTV) 720p 1280x720 @60Hz 1024x768 @72Hz (HDTV) 1080p...

  • Page 7: Hardware Installation

    DVI cables to VW-1312 DVI outputs. 3. Connect a device equipped with DVI output (such as PC) to the DVI input connector of VW-1312. 4. Connect your computer with the VW-1312 by a 9-pin RS-232 adapter and then install the software.

  • Page 8: Connection Diagram

    CONNECTION DIAGRAM...

  • Page 9: Operation Software

    The possible reasons causing this failure could be: ● The VW-1312 is not supplied with power or the VW-1312 enters deep sleep state. Please check the current status, and reboot the VW-1312.

  • Page 10: Instruction Of Software Operation

    Instruction of Software Operation Main Control Panel State Overall state and format setting 1. Save and Read: The current layout of the four outputs can be saved to a file. And the file can be uploaded in the future to resume the setting. 2.
  • Page 11 Input Resolution Setting the resolution of input 1. After 10 seconds, the new setting can be applied to VW-1312, but the input source and Display layout mode will return to default. 2. Please reset input source and Display layout mode...
  • Page 12 Setup Individual Output Channel There are totally 4 channel outputs for VW-1312, and each output can be independently setup to display any area of the input video. Each output can be with different output resolutions to adapt different combinations of monitors or projectors.
  • Page 13 For each display, users can define which area of the input video is to be displayed. Fundamentally, setup the X Total and Y Total first, and then define the upper-left (X Start, Y Start) and bottom-right (X End, Y End) corners for each display channel. The control panel to achieve this goal is as shown. This small area will demonstrate the resulting selection of the input video to be display for the selected output channel! “Original Input Video”...

  • Page 14: Troubleshooting

    Problem Recommendations  No power Check if you firmly plug the AC power core into the VW-1312  If you are recovering from power outage, accidentally unplug the adapter or other power surge conditions, leave the device off for a while and then power it on again.

  • Page 15: Warranty

    SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the VW-1312 features and specifications is subject to change without further notice.

Table of Contents