Samsung Galaxy S 4 mini User Manual page 134

1. Press and tap
2. Tap More networks > Printing, and then choose a print service from the list. The
Samsung Print Service Plugin is available by default.
3. Tap the ON/OFF switch to turn the service on or off. The service must be on to configure
settings or print.
Add a Printer
Before you can print to a printer, you must set it up on your phone. You'll need to know the IP
address of the printer; consult the printer's documentation for this information.
1. Press and tap
2. Tap More networks > Printing.
3. Choose a print service from the list, and then tap the ON/OFF switch to turn the service
on or off. The service must be on to add a printer.
4. Tap > Add printer >
Configure Print Settings
Choose options for printing from your phone.
Note: Below settings are examples only. Available settings will differ depending on the type of
print service and printer you are using.
1. Press and tap
2. Tap More networks > Printing.
3. Choose a print service from the list, and then tap the ON/OFF switch to turn the service
on or off. The service must be on to add a printer.
4. Tap > Settings to configure options. Available options may vary depending on the
type of printer, and not all printers support all options.
2-Sided printing for documents: Choose Simplex to print one page per piece of

paper, or choose Long edge or Short edge to print on both sides. Short edge and
Long edge refer to how the pages flip when moving through multiple pages.
Secure Release: If the optional printer supports secure release, and it is enabled,

you must enter a User ID to retrieve your printouts. Tap Secure release, and then
enter a User ID.
Settings
> Settings > Connections tab.
> Settings > Connections tab.
, and then enter a name and the IP address of the printer.
> Settings > Connections tab.
123