Subscribe to Our Youtube Channel
Summary of Contents for Limbsaw LSC
- Page 1 Installation & Operation Manual 2014 Edition for The LSC Circular Saw www.limbsaw.com OPMAN-LSCsaw-2014 Copyright 2014 The LIMBSAW Company...
-
Page 2: Customer Preparation Checklist
WARNING OSHA, ASABE, SAE and ANSI standards require the use of protective guards at all times for non-agricultural use. The LIMBSAW Company strongly recommends that such guards should be used to minimize risk of property damage, serious bodily injury or even death from object hazards or by contacting rotating parts, i.e. -
Page 3: Table Of Contents
Removal of LSC Circular Saw during Transportation ........ -
Page 4: Welcome
• Cuts branches up to 4.5” in diameter The LIMBSAW Company wants you to be satisfi ed with your new LSC Circular Saw. If for any reason you do not understand any part of this manual or are not satisfi ed with the service required, the following actions are suggested:... -
Page 5: Safety
Thoroughly read and understand the operator’s manual, references and other AVOID INJURY FROM FALLING OBJECTS! Recognize the material supplied with the LSC Circular Saw and tractor. If the operator hazards associated with working near overhead obstructions. Your cannot read English, it is the owner’s responsibility to explain this material to vehicle should be fi... - Page 6 • Slow moving tractors, self-propelled equipment, and towed • Riders on the tractor or LSC Circular Saw may be struck by foreign implements can create a hazard when driven on public objects or thrown off the machine causing serious injury.
-
Page 7: High Pressure Fluids Hazard
Periodically Avoid the hazard by relieving the pressure before connecting hydraulic or check the website of both your vehicle manufacturer and LSC Circular Saw other lines otherwise the connectors will not lock safely. -
Page 8: Safety Labels
Nunca Lea los manuales de seguridad y instalación del LIMBSAW LSC, antes de instalación y utilizan para otros fines. No lo utilice para cortar metal o mampostería. -
Page 9: Shipped Container Contents
Circular Blade ASSEMBLING THE SAW The Mast sections must be joined before mounting LSC Circular Saw to your vehicle. Mast assembly. Notice that there is a “cuff” bolted to the top piece of the mast. Unbolt the cuff, slide it off the mast, reverse position and slide back on without bolting. -
Page 10: Installing The Receiver
ASSEMBLING THE SAW (continued) CAUTION: Circular saw blade teeth are sharp. Use gloves and extreme caution when handling blade. Flange washer has marking on inside edge Be sure this edge faces blade during installation. Mount saw blade with printed side facing motor shown. —... -
Page 11: Mounting The Saw
Failure to do so can cause injury or death. OPERATIONAL GUIDELINES CAUTION: Thoroughly read and understand the operation manual, references and other material supplied with the LSC Circular Saw and tractor prior to operating this equipment. Failure to do so can cause injury or death. CAUTION:... -
Page 12: Optional Rotating Receiver Installation
OPTIONAL ROTATING RECEIVER INSTALLATION Installing Rotating Receiver. Rotating receiver mounts only on the right side of your bucket. Bracing on the side of the receiver prevents any lateral movement or slipping. NOTICE: There is a bolt on the back end of the receiver. Once the receiver is in the correct position, tighten bolt fi... -
Page 13: Using Your Lsc Circular Saw
USING YOUR LSC CIRCULAR SAW WARNING: Never use your LSC CIRCULAR SAW if it is damaged, not assembled correctly, not maintained properly, or not adjusted properly. For correct assembly of the saw and blade please follow the instructions in this Installation and Operation Manual. -
Page 14: Replacement Parts Information
REPLACEMENT PARTS All of the components on your LSC Circular Saw are replaceable. Should you need a part, please don’t hesitate to call us. You can contact us through our website at www.limbsaw.com or by phone at (580) 272-3194. -
Page 15: Warranty Information
Proper venue for any lawsuits arising from or related to this limited warranty shall be only in Cleveland County, OK. LIMBSAW may waive compliance with any of the terms of this limited warranty, but no waiver of any terms shall be deemed to be a waiver of any other term. -
Page 16: References
Fluid Power Safety Institute (FPSI), Avoid High-Pressure Fluids, Ref. No. SA-033, http://www.fl uidpowersafety.com/fpsi_alert-33.html Suggested References The LIMBSAW Company assumes no liability for the use or misuse of information provided in the following references: FEMA, Farm Equipment Manufacturers Association, Safety 4 Just Kids, 2008, http://www.farmequip.org/safety Includes AG Safety Links for additional information and materials. - Page 18 Return address: Place first class stamp here. Post Office will not deliver without proper postage The LIMBSAW Company LIMBSAW Registration 2701 36th Ave. SE Norman, OK 73026...
Need help?
Do you have a question about the LSC and is the answer not in the manual?
Questions and answers