Advertisement
Quick Links
Quick Installation Guide for the Access Code Ticket Printer
used with the LanPro's ROVER LP-ROV106
The LP-P101, is an access code ticket printer that prints pre-programmed tickets on demand. A tablet
computer or laptop is required to initiate ticket printing by touching buttons on the screen, exactly like
a point of sale terminal. The buttons are preset using the ticket printer administration page on the
gateway.
The ROVER LP-ROV106 Internet Controller Gateway has a ticket printer interface.
This manual will guide you on the installation of the LP-P101.
Please download the product manual at:
Powering the LP-P101
The LP-P101 needs a 12 VDC power supply able to deliver up to 3 Ampere. We recommend that you use
the Power Supply included in the package to power the LP-P101 to prevent damage to the unit and
comply with safety regulations.
Typical Installation Scheme
LP-289ai
LP-PoE151
LP-N24V2
Wireless Internet
Android 7" tablet or Apple iPad
is used to display the ticket buttons.
Touching a button prints a ticket with
an access code on the LP-P101
Injector
DC
LP-SW902FGP
LP-C300N
Internet
Kiosk
www.lanpro.com
P101
ROVER Thermal Ticket Printer
ROVER Thermal Ticket Printer
Internet Gateway Ticket Printer
LP-P101
http://www.lanpro.com
LP-ROV106
WAN
LAN
LP-P101
Business
center
computer
LPP101_UG_ENB01W
DSL / Cable / Router
DC 5, 9, 12 VDC
Data 10/100/1000 M CAT 5e / 6 cable
Data + PoE 48 VDC (af)
DC 15 VDC
Internet
Figure 1
Advertisement
Summary of Contents for Lanpro LP-P101
- Page 1 Powering the LP-P101 The LP-P101 needs a 12 VDC power supply able to deliver up to 3 Ampere. We recommend that you use the Power Supply included in the package to power the LP-P101 to prevent damage to the unit and comply with safety regulations.
-
Page 2: Printer Configuration
The LP-P101 ticket printer has a LAN port underneath the unit. An Ethernet cable must be connected to the LAN port either directly to the ROVER LP-ROV106 LAN port, or connected to the ROVER LAN port through a switch. The tablet computer or laptop that is used to control ticket printing will connect to the ROVER LP-ROV106 via the wireless network. - Page 3 Figure 5 STEP 4: Configure the one-click button Type the button name which will appear in the button, then select the access code characteristics that will be used to generate the access code. Finally click ‘Create button’ . Figure 6 www.lanpro.com...
- Page 4 Designed and Manufactured under LanPro™ standards and specifications. LanPro™ is a member of One Network Alliance Group of Companies. LanPro™ products are made in one of the following countries: USA, China, Taiwan, Thailand and Korea. The exact country of origin is unknown.