Connecting to an audio System
You can connect the Blu-ray player to an audio system using one of the
methods illustrated below.
- Do not connect the power cord to the wall outlet until you have made
all the other connections.
- When you change the connections, turn off all devices before you start.
method 1 Connecting to an HdmI supported AV receiver
Connect an HDMI cable from the HDMI OUT jack on the back of the
●
product to the HDMI IN jack on your receiver.
Best quality (Recommended)
●
method 2 Connecting to an AV receiver with dolby digital or a dTS
decoder
Using a digital Coaxial cable (not supplied), connect the Coaxial Digital
●
Audio Out jack on the product to the Digital Coaxial In jack of the receiver.
Good quality
●
You will hear sound only through the front two speakers with Digital
●
Output set to PCM.
method 1
Audio
You can connect your player to your network router using one of the
methods illustrated below.
To use the DLNA network functionality, you must connect your PC to your
network as shown in the illustrations.
The connection can be wired or wireless.
Wired Network
method 2
Audio
✎
NOTES
Internet access to Samsung's software update server may not be allowed, depending
■
on the router you use or your ISP's policy. For more information, contact your ISP
(Internet Service Provider).
DSL users, please use a router to make a network connection
■
Connecting to a Network Router
Broadband modem
(with integrated router)
Broadband
service
Or
Router
Broadband
service
Broadband
modem
.
9