Chapter 2 Parts Of The Pump; Overall View Of The Pump - Omega Engineering OMEGAFLEX FPU500 User Manual

2

2.1 Overall View of the Pump

1
7
2
5
Item Description
1 Stator
2 Latch
3 Clamp Plate
4 Clamp Screw
5 Rotor Shaft
6 Mounting Holes
7 Lower Shield
8 Base
9 Mounting Screws
10 Tubing
Parts of the Pump
8
Figure 2-1. Overall View
Function
Fixed surface for tubing compression
Used to open and close the Stator
Secures the tubing during pump operation
Adjusts the tubing clamp position
Main drive shaft for the pump
Allow clearance for Mounting Screws
Shields the tubing, supports the Rotor Assembly
Mounting surface to attach the pump to the
motor, supports the Rotor Assembly
Attach the pump to the motor (screws not shown)
Conduit for fluid
4
3
6
10
2-1