Dell 2009W User Manual page 13

EXIT
BRIGHTNESS
& CONTRAST
Back
Brightness
Contrast
Exit Menu
AUTO
ADJUST
INPUT
SOURCE
Back
VGA
DVI-D
Scan for
Source
Exit Menu
PRESET
SETTING
Downloaded from ManualMonitor.com Manuals
Select to exit the main menu.
Use this menu to activate Brightness/Contrast adjustment.
Push to go back to the main menu.
Brightness adjusts the luminance of the backlight.
Push the button to increase brightness and push the
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Push the button to increase contrast and push the
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
Push to exit the OSD main menu.
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use
with your particular setup.
NOTE: In most cases, Auto Adjust produces the best image for your configuration.
NOTE: AUTO ADJUST option is only available when you are using the analog (VGA) connector.
Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor.
Push to go back to the main menu.
Select VGA input when you are using the analog (VGA) connector. Push
Select DVI-D input when you are using the Digital (DVI) connector. Push
Push to scan for available input signals.
Push to exit the OSD main menu.
Use the Preset Modes to adjust the color setting mode and color temperature.
button to decrease brightness (min 0 ~ max 100).
button to decrease contrast (min 0 ~ max 100).
to select the VGA input source.
to select the DVI input source.