Krups F608 Instructions Manual page 14

Components of the hand-mixer
a Front output
b Rear output (according to model)
c Controls:
c1 Turbo (front outlet)
c2 ON/OFF switch and speed
regulator (front drive)
c3 Ejection (front outlet)
Start / stop (rear outlet)
USING FRONT OUTLET ACCESSORIES
Whisks hooks
„ „
Clean the whisks and hooks before use. Rinse and dry them.
„ „
Insert the whisks or hooks until they are fully locked in place. Always insert the
accessory fitted with a toothed ring into the opening indicated on the hand-mixer by
a ring which is also toothed (fig.2).
„ „
Plug in the hand-mixer.
„ „
Depending on the quantity being prepared, place the ingredients into a suitable
container (bowl or cup).
„ „
Place the whisks or hooks into the container and start the hand-mixer using the
control (c2).
To prevent splashes when starting or for delicate preparations (creams, sauces) your
hand-mixer is fitted with an anti-splash function. To use this:
„ „
Push and hold the control (c2) to the left into position "M" (fig.3).
„ „
Release the control (c2) to return it to position "0".
„ „
To continue preparation, select a faster speed (fig.4).
Your hand-mixer is fitted with a Turbo control (c1), which enables you to use all the
power of your hand-mixer instantly just by pressing a button (fig.5).
The appliance may be operated up to 10 minutes with the whisks or up to 5 minutes with
the hooks on the fastest speed or in the 'turbo' position". The whisks are used for light
preparations as whisked egg whites. The hooks are used for heavier preparations.
„ „
When you have finished, return the control (c2) to position "0".
„ „
Unplug the hand-mixer.
„ „
Remove the whisks or hooks by pushing the ejection control (c3) (fig.6).
For the other optional accessories and that are no longer sold, refer to their instructions.
10
DESCRIPTION
Accessories on front drive
d Whisks item XF904D10
e Hooks item XF905D10
f
Ultrawhip whisks XF913D10
(according to models)
Accessories on the rear drive
g Stainless steel balloon whisk item
XF906D10 (according to model)
h Stainless steel blender shaft item
XF907D10 (according to model)