Brookstone STACKFAN Manual page 3

3. Close supervision is necessary when the unit is used by or near children
or pets, or left unattended.
4. Do not allow children to play with any product packaging, such as plastic bags.
5. Do not operate the unit with a damaged cord or plug, after the product
malfunctions, or has been dropped or damaged in any way.
6. This product is intended for domestic use only and not for commercial,
industrial or outdoor use.
7. Always turn the unit off and unplug before moving its location.
8. To disconnect from the power supply, grip the power adaptor and pull from
the power socket. Never pull by the cord.
9. Do not operate the unit in areas where petrol, paint, or other flammable
liquids are used or stored.
10. Do not use the unit in artificially hot or humid conditions or allow it to be
used in any hazardous environment.
11. Do not place the unit near an open flame, cooking or heating appliance,
or hot surface.
12. This unit is not intended for use in wet or damp locations. Never locate the
unit in an area where it may fall into a sink or other water container.
13. Always use on a dry level surface.
14. Do not let the power cord hang over the edge of a table or counter.
Arrange the power cord away from an area where it may be tripped over.
15. Do not run the power cord under carpeting. Do not cover cord with throw rugs,
runners, or similar coverings. Arrange cord away from traffic area and where it
will not be tripped over.
2
16. Do not place objects on the product or allow objects to obstruct the inlet
or outlet openings.
17. Do not operate in close proximity to walls or curtains, etc.
18. Do not attempt to repair the unit. To repair the unit, take it to a qualified
service engineer.
19. Do not operate any fan with a damaged cord or plug. Discard fan or return
to an authorized service facility for examination and/or repair.
20. Unplug unit when not in use.
21. Switch the product off and remove the plug from the power socket
before servicing.
22. Attention: To reduce the risk of electric shock, this product has a polarized
plug (one blade is wider than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the proper outlet. DO NOT
CHANGE THE PLUG IN ANY WAY.
23. This product employs overload protection (fuse). A blown fuse indicates
an overload or short-circuit situation. If the fuse blows, unplug the product
from the outlet. Replace the fuse as per the user servicing instructions on
page 11 (follow product marking for proper fuse rating) and check the product.
If the replacement fuse blows, a short-circuit may be present. Call Brookstone
Customer Service at 800-846-3000.
24. Risk of fire. Do not replace attachment plug as it contains a safety device
(fuse) that should not be bypassed. Discard product if the attachment plug
is damaged.
SAVE THESE INSTRUCTIONS
3