Insert The Battery; Close The Cover; Using The Screen - Canon PowerShot G1 X Getting Started

Initial Preparations
Terminals Battery Lock

Using the Screen

4

Insert the battery.


While pressing the battery lock in the
direction of the arrow, insert the battery
facing as shown and push it in until it clicks
into the locked position.

To remove the battery, press the battery lock
in the direction of the arrow.
Check the card's write-protect tab
and insert the memory card.

Recording is not possible on memory cards
with a write-protect tab when the tab is in the
locked (downward) position. Slide the tab up
until it clicks into the unlocked position.

Insert the memory card facing as shown until
it clicks into the locked position.

To remove the memory card, push it in until
you feel a click, and then slowly release it.
Label

Close the cover.


Lower the cover in the direction of the arrow
and press it until it clicks into the closed
position.

Open the screen (
lens 180° (

Close the screen in this orientation (
) and rotate it toward the
).
).