Inserting The Battery And Memory Card; Insert The Battery - Canon PowerShot SX50 HS Getting Started

Initial Preparations

Inserting the Battery and Memory Card

Terminals
Label
4
Open the cover.
1
 
Slide the cover ( ) and open it ( ).

Insert the battery.

2
 
While pressing the battery lock in the
direction of the arrow, insert the battery
as shown and push it in until it clicks into
the locked position.
 
To remove the battery, press the battery
lock in the direction of the arrow.
Check the card's write-protect
3
tab and insert the memory card.
 
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked (downward) position.
Slide the tab up until it clicks into the
unlocked position.
 
Insert the memory card facing as shown
until it clicks into the locked position.
 
To remove the memory card, push it in
until you feel a click, and then slowly
release it.
Close the cover.
4
 
Lower the cover in the direction of the
arrow and press it until it clicks into the
closed position.