Canon EOS 1200D Instruction Manual page 244

w Printing
Printing Effect
EOn
EOff
EVivid
ENR
0 B/W
0 Cool tone
0 Warm tone
zNatural
zNatural M
EDefault
* When you change the printing effects, changes are reflected in the image
displayed on the upper left of the screen. Note that the printed image may
look slightly different from the displayed image, which is only an
approximation. This also applies to [Brightness] and [Adjust levels] on
page 246.
244
Set the printing effects (image
4
optimization).
The image will be printed using the printer's standard colors.
The image's Exif data is used to make automatic corrections.
No automatic correction will be applied.
The image will be printed with higher saturation to produce
more vivid blues and greens.
Image noise is reduced before printing.
Prints in black-and-white with true blacks.
Prints in black-and-white with cool, bluish blacks.
Prints in black-and-white with warm, yellowish blacks.
Prints the image in the actual colors and contrast.
No automatic color adjustment is applied.
The printing characteristics are the same as the "Natural"
setting. However, this setting enables finer printing
adjustments than with "Natural".
The printing will differ depending on the printer. For details,
refer to the printer's instruction manual.
Set them if necessary. If you do not
need to set any printing effects, go to
step 5.
Contents displayed on the screen
differ depending on the printer.
Select the option, then press <0>.
Select the desired printing effect, then
press <0>.
If the <e> icon is displayed brightly
next to <z>, you can also adjust
the printing effect (p.246).
Description