Mtc/Abs; Load - KTM 2014 1190 Adventure Owner's Manual

7 COMBINATION INSTRUMENT
7.9.10

"MTC/ABS"

7.9.11

"Load"

Condition
• The vehicle is stationary.
–
Press the UP or DOWN button until the "MTC/ABS" menu appears on the matrix display.
In the "MTC/ABS" menu, "MTC" and "ABS" can be switched off.
In "ABS mode", a choice can be made between "Road" and "Offroad".
Info
After the ignition is switched on, traction control and ABS are enabled again.
When the "Offroad" ABS mode is enabled, ABS only controls the front wheel. The
rear wheel is not controlled by ABS and may block during braking maneuvers.
401837-01
When the "Road" ABS mode is enabled, the brakes are also applied to the rear wheel
when the front brake is activated. ABS can intervene on both wheels.
Condition
• Model with EDS.
• The vehicle is stationary.
• Engine is running.
–
Press the UP or DOWN button until the "Load" menu appears on the matrix display.
Pressing the SET button opens the menu.
–
Use the UP or DOWN button to select a load status. Press the SET button to confirm the
selection.
In the "Load" menu, you can choose between four load states.
401833-01
58