Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Apricus Datalogger DL2
-
Page 1: Electrical Connection
Datalogger DL2 beginning with firmware version 2.0.0 Short manual Mounting Electrical connection Operating controls Thank you for buying this product. Short manual Please read this manual carefully to get the best performance from this unit. Please keep this manual carefully. -
Page 2: Description Of Symbols
Safety advice Target group Please pay attention to the following safety advice in order to avoid danger and These instructions are exclusively addressed to authorised skilled personnel. damage to people and property. Only qualified electricians should carry out electrical works. Instructions Description of symbols Attention must be paid to the valid local standards, regulations and directives! -
Page 3: Table Of Contents
Contents Overview ................... 16 Included .................... 17 About this manual................17 Installation ..................18 Wall mounting ......................18 Electrical connection ....................19 VBus ® / data communication .................. 19 Connecting the network cable ................19 Indications, operating controls, and connections ......20 Operating control LED .................. -
Page 4: Overview
Overview This additional module enables the acquisition and storage of large amounts of • With VBus.net support data (such as measuring and balance values of the solar system) over a long period • Easy visualisation of the measured and balance values of your system of time. -
Page 5: Included
Included About this manual This document is a short manual for the DL2 Datalogger. This short manual contains information about the following topics: • Installation • Electrical connection • Operating controls • Menu • Using the SD card A detailed manual with the complete information about the web interface can be found on the included CD. -
Page 6: Installation
Installation Wall mounting The unit must only be located in dry interior locations. In order to function fault- ATTENTION! ESD damage! lessly, the device must be protected from strong electromagnetic fields in the se- Electrostatic discharge can lead to damage to electronic com- lected mounting location. -
Page 7: Electrical Connection
Electrical connection VBus / data communication ® Carry out the connection of the Datalogger to other modules in the order described below: Î Connect the data cable (VBus , ) to the controller . If necessary, extend the ® cable using the terminal block included and a common two-wire cable. -
Page 8: Indications, Operating Controls, And Connections
Indications, operating controls, and connections Operating control LED The following elements are featured on / in the housing of the DL2 Datalogger: Operating control LED / Reset button Memory capacity and VBus ® signal LEDs LAN connector ... -
Page 9: Data Memory Progress Bar
Data memory progress bar LAN connector The data memory progress bar indicates the currently occupied memory capac- The integrated LAN connector is located on the right-hand side of the device. ity of the DL2 Datalogger. The LAN connector supports transfer rates of up to 100 MBits per second. The data memory progress bar is divided into 10 segments. -
Page 10: Firmware Update With Sd Card
Firmware update with SD card Ordering software New fi rmware versions extend the functional range and enhance the operation. For an expense allowance of EUR 20,-, a DVD containing the source code and the compiler scripts of the Open Source applications and -libraries can be ordered. The current software can be downloaded from www.resol.de/fi rmware. - Page 12 They can only be used at your own risk. No liability is assumed for use outside the copyright requires the approval of Apricus Inc.. This especially ap - incorrect, incomplete or false information and / or the resulting damages.
Need help?
Do you have a question about the Datalogger DL2 and is the answer not in the manual?
Questions and answers