Remote Control Unit - Samsung DVD-HR710 Instruction Manual

Remote Control Unit

The remote control doesn't work.
Checkpoint 1
Checkpoint 2
Checkpoint 3
Checkpoint 4
Other
I forgot my password for parental supervision.
Checkpoint 1
Is it possible to change a subtitle and an audio
signal on a recorded disc?
Checkpoint 1
Downloaded From DvDPlayer-Manual.com Samsung Manuals
Point the remote control at the remote
control sensor on your HDD & DVD
RECORDER. Allow for proper
distance. Remove obstacles between
your HDD & DVD RECORDER and
the remote control.
Check whether the batteries are
drained.
Check the TV/DVD selection button
setting.
Check whether TV control button is
selected or not.
Press and hold the SEARCH/SKIP(
button on the front panel of the
Recorder for more than 5 seconds
with no disc in the unit. All settings
including the password will revert to
the factory settings. Do not use this
unless absolutely necessary. (Note
that this function is possible only when
no disc is inserted.)
A recorded disc is played with only
the subtitle and the audio signal
which were selected during recording.
Other problems.
Read the table of contents and then
Checkpoint 1
find and read the section describing
your problem, follow the instructions
given.
Plug your HDD &DVD RECORDER
Checkpoint 2
off and on.
If the problem still persists, contact a
Checkpoint 3
nearby Samsung service centre.
)
English - 129