Table of Contents
Advertisement
Operating System Installation
For Windows Users
Start by choosing Install Software at the beginning of the CD. Choose
Asynchronous COM: Port Software, SeaCOM.
Other Operating Systems
Refer to the appropriate section of the Serial Utilities Software.
System Installation
The OMG-COMM8-PCI can be installed in any of the PCI expansion slots and
contains a single jumper strap that must be set for proper operation. Please see
the Card Setup section of the manual for information on this jumper.
1.
Turn off PC power. Disconnect the power cord.
2.
Remove the PC case cover.
3.
Locate an available PCI slot and remove the blank metal slot cover.
4.
Gently insert the OMG-COMM8-PCI into the slot. Make sure that the
adapter is seated properly.
5.
Replace the screw.
6.
Replace the cover.
7.
Connect the power cord.
Installation is complete.
OMG-COMM8-PCI
Installation
Installation
Page 4
Advertisement
Table of Contents
