Operation Instructions; Storage And Protection; Maintenance And Protection - Kero-Sun FSTC-40 Owner's Manual

OPERATION INSTRUCTIONS

This electric fan has fan speed, timer, swing.
A. Fan Speed: After putting the plug into the socket, you can
start up the function of the electric fan and you can adjust
the fan speed.
Press the speed control knob 0, fan will stop running.
Speed control knob 1, the fan will run at low fan speed.
Speed control knob 2, the fan will run at middle fan speed.
Speed control knob 3, the fan will run at high fan speed.
Β. Timer knob: You can adjust the timer by choosing the prop-
er position.
For constant operation put the timer knob in position ON.
Also you can adjust the desired function period by adjust-
ing the timer knob into 20 or 40 or 60 or 80 or 100 or 120
minutes.
C. Swing direction: If you want stable air direction pull up the
oscillation knob. If you want to have rotation directions of
the air press down the oscillation knob.

STORAGE AND PROTECTION

Disassemble the electric fan by reversing the way of assembly.
Before storage, smear the lubricant on the axis of rotation.
Wipe unit body, front and back grill and blade in order to remove dust and possible stains.
Repack the electric fan to its initial package and store it until the next use in dry environment.

MAINTENANCE AND PROTECTION

MAINTENANCE
When you no longer want to use the electric fan, end its operation and take out of electrifi ed socket
the power plug.
Clean the exterior with a damp cloth and then with a dry towel.
Do not use abrasive cleaning agents or solvents for cleaning since this can cause damage to the
surface of the electric fan.
Do not use alkaline detergent, alcohol, gasoline, benzene or thinner for cleaning since this will
cause erosion and serious damage to the electric fan.
4
ENGLISH
FAN SPEED KNOBS
TIMER