Quick Start - Audiothingies Micromonsta User Manual

Quick start

1. Connect audio outs to a mix table, turn the volume knob fully clockwise.
2. Connect a MIDI keyboard into the MIDI Input
3. Power the MM with a 9V DC 2.1mm PSU.
4. Play some notes on MIDI channel 1, you should hear patch number 1 playing
5. Press Load
6. Turn encoder 6 to navigate thru the patches. Press Load again to load selected patch, press
Home to cancel and return to previously loaded sound.
7. Alternatively, you can push encoder 1 & 2 to navigate and load the previous or next patch
Audiothingies Micromonsta user manual 6