Page 1
FTB12000JS Mult i-Funct ion Jump Star ter USER MANUAL...
Page 2
• Get to know your device DC out USB out Lamp button SOS OUTPUT INPUT DC in ON/OFF/Flashlight Battery clip interface Lamp/SOS Flashlight harge indicator • Features 1. In case a car battery cannot start the car, this device can play the role of emergency ignition.
Page 3
• Buttons 1. Power on/o Short press Power button to turn the charge indicator on/o . Note: The device will turn o automatically after 90 seconds of no-load. 2. “Flashlight” on/o 1) Long press Power key (3 sec) to turn ashlight on. 2) Repeat long press Power key (3 sec) to turn ashlight o .
Page 4
1. Connect red clamp «+» to the positive contact of the car battery, then connect black clamp «-» to the negative contact. 2. Connect mini Jumper clamps to the FTB12000JS 12V out. (Disconnect the car battery if it is completely discharged).
Page 5
You can charge FTB12000JS using wall charger or car charger. Warning: • Never allow red and black clamps to touch each other or another common metal conductor — this could cause damage to the unit and/or create a sparkling/explosion hazard •...
Page 6
• Accessories: 1. AC Adapter 2. DC Cable 3. USB Cable 4. Battery clip 5. Notebook connectors www.iconbit.com...