Download Print this page

Polycom Group Series Reference Manual

Download this manual

Polycom Group Series Reference Guide

TECHNICAL SUPPORT 1-866-454-6861

Ensure that the power cable is

plugged into the power outlet in the

wall.

Confirm that the network cable is

plugged into the network outlet in the

wall. The network cable must be

plugged into a dedicated OTN network

outlet.

Verify that the power bar is turned

on. The power bar supplies the whole

system and you can turn off your system

here at the end of your session.

Ensure that the monitor is on. If you

cannot see the camera view, you may

have to switch the video source.

Check that the codec/camera is on

by checking the LED light at the front

of the codec

Pick up the remote control and

unmute your videoconferencing sound

by pressing the "Mic Off" button on the

remote control.

Do you have a question about the Group Series and is the answer not in the manual?

Page 1: Technical Support
Polycom Group Series Reference Guide Ensure that the power cable is plugged into the power outlet in the wall. Confirm that the network cable is plugged into the network outlet in the wall. The network cable must be plugged into a dedicated OTN network outlet.
Page 2 Polycom Group Series Reference Guide The Extron box enables you to select a specific video input. For peripheral devices, please ensure that number 1 is selected. For computers or laptops, confirm that number 4 is selected. At this point, you can use the Presentation button on the remote to switch between the main camera and your presentation.
Page 3 Polycom Group Series Reference Guide...
Page 4 Polycom Group Series Reference Guide Show Content Before sharing content, confirm that your laptop is set- up properly and the presentation cable is plugged into the computer. Click the menu button from the remote and choose the Show Content option. At this point, select the content from the list of results that you would like to share.
Page 5 Polycom Group Series Reference Guide Layout You can view the self-view window, by pressing the menu button and navigating to Layout option. Choose from an assortment of screen layouts that incorporate the self-view window in various positions and sizes. To...