Table of Contents
Advertisement
Quick Links
1
GSM/GPRS/GPS Vehicle Tracker
Model A/B User Manual
Preface
Thank you for purchasing the tracker. This manual shows how to operate the
device smoothly and correctly. Make sure to read this manual carefully before
using this product. Please note that specification and information are subject to
changes without prior notice in this manual.
Any change will be integrated in the latest release. The manufacturer assumes
no responsibility for any errors or omissions in this document.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Vehicle Systems GPS103AB
- Page 1 GSM/GPRS/GPS Vehicle Tracker Model A/B User Manual Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual.
-
Page 2: Table Of Contents
Contents 1. Function Introduction ............................4 2. Applications ................................ 5 3. Hardware Description ............................5 4. Accessories ................................. 6 5．Specifications ..............................7 6. Operating Instructions............................7 6.1 Terminal Installation ............................ 8 6.2 SIM CARD Installations ..........................9 6.3 Turn on the Tracker Device.......................... 9 6.4 GSM/GPS LED Indicator ........................... - Page 3 6.19.5 Geo-fence ............................19 6.19.6 Multi-area management........................20 6.19.7 Movement alarm ..........................21 6.19.8 Over speed alarm..........................22 6.19.9 Accident alarm (Option): ........................22 6.19.10 ACC working alarm ........................22 6.19.11. Fuel alarm ............................23 6.20 Cut off the Oil and Power System ......................23 6.21 Arm................................
-
Page 4: Function Introduction
1. Function Introduction 1.1 This tracker is a new product based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. It can track and monitor remote target by SMS or internet. 1.2 Features 1.2.1 Support both GPS &... -
Page 5: Applications
1.2.6 Support for point-to-point, point to group, group-to-group monitoring. 1.2.7 Set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. 2. Applications Used widely for vehicle and other moving objects tracking. 3. Hardware Description ① GSM Antenna connector ⑦... -
Page 6: Accessories
③ SIM card slot Pop-up switch ⑨ GSM/GPS LED ④ MicroSD slot ⑩ Backup battery switch ○ ⑤ Monitor microphone jack 11 Remote controller antenna ⑥ GPS Antenna connector (Optional for Model B only) 4. Accessories PHOTOES NAME NOTE GPS Antenna 2 meters GSM Antenna 2 meters... -
Page 7: Specifications
Option for both model A Shock sensor and B Option for both model A Siren and B Option for model B Remote controller ONLY 5．Specifications Content specifications 83*54*26mm DIM. Weight 120g Network GSM/GPRS 850/900/1800/1900Mhz Band GPS Sensitivity -159dBm GPS Accuracy Cold status 45s GPS Start time Warm status 35s... -
Page 8: Terminal Installation
6.1 Terminal Installation 6.1.1 Please ask the qualified engineers to install it. 6.1.2 Do not install it in an environment which is over GSM performance index, and please pay attention to fix the antennas in an appropriate position with good signals. 6.1.3 Pay attention to make installation location preventing water and dust. -
Page 9: Sim Card Installations
6.1.5 Knowing about the type of the door trigger is positive or negative trigger. Please connect the green wire to the door control circuit if it is positive, and connect blue wire if it is negative. 6.1.6 Please put SOS button at the place driver can touch. 6.1.7 Insert the shock sensor plug into the sensor jack. -
Page 10: Gsm/Gps Led Indicator
6.4 GSM/GPS LED Indicator 6.4.1 Red LED indicator on: No GSM network signals. 6.4.2 Red LED indicator flashes fast (one time each second): GSM Network signal is normally, and tracker works under GSM mode. 6.4.3 Red LED indicator flashes slowly (one time each three second): Tracker works under GPRS mode. -
Page 11: Authorization
6.6.2 Be sure to keep the new password in mind, you have to upload the software to restore the original setting in case of losing the new password. 6.6.3 Attention: Make sure the new password is in 6 digits Arabic numbers, or else the tracker cannot recognize the password. -
Page 12: Single Locating
“admin123456 008613322221111” to tracker to set 13322221111 as an authorized number. 6.8 Single Locating 6.8.1 If there aren’t any authorized number set-up, it will reply all calls with a location report; if there are authorized numbers set-up, then it will not respond when an unauthorized number calls it. -
Page 13: Track With Unlimited Times Upon Time Interval
will report the latitude & longitude at intervals of 30 seconds for 5 times. (s:second, m:minute, h:hour). This command set must be in 3 digits and the maximum value is 255. e.g. fix030s005n123456 6.9.2 Track with unlimited times upon time interval: Send SMS “fix030s***n+password”... -
Page 14: Turning Points Update Automatically
6.10 Turning points update automatically 6.10.1 The tracker will update the positions automatically to web server once the vehicle changing driving direction over pre set angle value to form a smooth trajectory consistent with the actual road, this function is only effective in GPRS mode. -
Page 15: Location Based Service (Lbs) / Cell-Id Locating
password for GPRS login, Please refer to 6.34.1 and 6.34.2 to configure the APN, user name and password for GPRS login. 6.12.2 After configure the APN, send "address+password" to device, it will reply SMS including real street/address name. For example: No.113, Guankou 2nd Rd, Nantou, Nanshan district, Shenzhen, Guangdong, china. -
Page 16: Data Logging
restore to “track” mode. e.g. tracker123456 6.15 Data logging 6.15.1 Auto logging：When the tracker device lost GSM signals or fall offline from GPRS, tracker will log the tracking position and alerts automatically in the SD card on the basis of the pre-set condition, when GSM signals get back, all the event alerts will be auto-sent to the authorized numbers or monitoring platform (server), but the logged tracking data should be loaded to the monitoring platform via SMS command. -
Page 17: Data Load
6.16 Data Load 6.16.1 Current date Load: Send SMS: “load+ password” to tracker device, it will reply: “load ok” if the device is working well under GPRS mode; if not, it will reply “load fail! Please check gprs” that means device does not work under GPRS mode. -
Page 18: Alarms
number+space+code" to tracker, it will forward the code to carrier’s phone number and return the balance message received from carrier’s phone number. Take china mobile for example, china mobile is one of carrier in china, mobile users can send “ye” to china mobile number 10086, and 10086 will send user’s balance back, following is an illustration how this function works. -
Page 19: Gps Blind Spot Alert
6.19.3. GPS blind Spot alert 6.19.3.1 This function deactivates as default, send SMS “gpssignal+password+space+on”, it will send alert SMS “no gps+last valid latitude/longitude before lost signal” 6.19.3.2 Send SMS “gpssignal+password+space+off” to deactivate. 6.19.4 SOS Long Press the SOS button for 3 seconds （ For model B, press button on remote controller for 3 seconds）, the tracker device will send SMS “help me!+lat./long.”... -
Page 20: Multi-Area Management
Remark: The first latitude & longitude is coordinate of the top left corner of the Geo-fence, while the second latitude & longitude is the coordinate of the bottom right corner, it will alarm at interval of 3 minutes. Cancel: Send SMS “nostockade+password” to deactivate this function. 6.19.6 Multi-area management 6.19.6.1 Set Area Send SMS command... -
Page 21: Movement Alarm
name,distanceM" to tracker, if name is not repeated and area doesn't cover others, it will reply "rename ok!" for successful configuration. Example: Send"rename123456 area01;school,800M", it means the new area name is "school", and covers area of a radius of 800 meters. 6.19.6.4 Activate multi-area management Send SMS command "area+password+space+on"... -
Page 22: Over Speed Alarm
6.19.7.2 Cancel: Send SMS “nomove+password” to deactivate the movement alarm. 6.19.8 Over speed alarm Set up: Send SMS “speed+password+space+080” to the unit (suppose the speed is 80km/h), and it will reply “speed OK!”. When the target moves exceeding 80km/h, the unit will send SMS “speed+080!+ latitude & longitude”... -
Page 23: Fuel Alarm
off+latitude & longitude" to authorized numbers, that means ACC off. 6.19.10.2 Send "noACC+password" to disabled this function, tracker will reply "noACC ok". 6.19.10.3 This configuration can only enable and disable the alarm to authorized numbers; it will send to web server automatically in GPRS mode and can't be disabled. -
Page 24: Arm
that means vehicle has resume the oil supply. 6.21 Arm 6.21.1 Set up arm by SMS Send SMS command “arm+password” to the tracker device in the vehicle. It will reply “Tracker is activated” in both armed and disarmed state, and the SMS command will make the tracker device enter into armed state if the unit currently disarmed. -
Page 25: Function Of Remote Controller (Option, For Model B Only)
6.22.2 Disarm by remote controller (Option, for model B ONLY) Press button on the remote controller, the car enters into disarm state, and the siren will beep two times, no SMS reply. 6.23 Function of Remote Controller (Option, for model B ONLY) Button Function Descriptions... -
Page 26: Acc Alarm
seconds each time, starting from the 3rd time, alarm siren sounds for 10 seconds, send “disarm+password” to stop it. 6.24.3 ACC alarm The unit will send SMS “ACC alarm+lat/long” to the authorized number in at interval of 3 minutes when the engine of the car is turned on, that is the key is rotated to ACC.ON position to start the car in arm state;... -
Page 27: Alarm Without Gsm Network Service
Quit silent mode Press to quit 6.26. Alarm without GSM network service When the car is in the place without GSM network service, siren will be sound under non-silent mode if alarm is triggered (door, sensor, ACC), but no SMS alarm will send to authorized number. 6.27 Check the Vehicle State. -
Page 28: Sleep Mode
6.29 Sleep Mode 6.29.1 This function is deactivated as default, send “sleep+password+space+on”, tracker will reply “sleep on ok”. When vehicle is not driving (ACC is OFF), GSM module fall asleep; GPS module shut off; and tracker works in low power consumption. Calling, SMS command and any triggered alarm can awake it. -
Page 29: Gprs Setting
6.34 GPRS Setting User must send SMS via cell phone to set up APN, IP and port before starting tracking by GPRS. 6.34.1 Configure APN 6.34.1.1 APN standards for Access Point Name and differs from country to country. For more information about your local APN, please inquire with your local GPRS network operator. - Page 30 6.34.2.2 Send SMS “up+password+space+user+space+password”If succeeded, “user, password ok!” is returned by the tracker in SMS. 6.34.2.3 For instance, send SMS “up123456 jonnes 666666” to the tracker, and if succeeded, the tracker returns “user, password OK” Note: 123456 is tracker device password, jonnes is the user name for GPRS login, 666666 is the password for GPRS login.
-
Page 31: Less Gprs Traffic
6.35 Less GPRS traffic 6.35.1 Tracker will change to less GPRS traffic mode after parking 5 minutes (ACC is OFF), GPRS disconnect and connect again when alarm being triggered or vehicle starts driving. 6.35.2 Activate this function: Send "less gprs123456 on", tracker will reply "less gprs on ok". -
Page 32: Cautions
trackers. 6.37.4 Configure your tracker to web platform to track it online Step I: Configure APN, please refers to 6.34.1 Step II: Configure user name and password of gprs, please refers to 6.34.2 Step III: Configure IP and port, please use the corresponding IP and port of the server you choose, refers to 6.34.3 for details. -
Page 33: Faults & The Solutions
8． Faults & the Solutions Faults Solution Startup Fail Please check out the power wiring in correct place. Call Fail Check the GSM antenna connected. Check whether the SIM card in place. Check whether the normal power supply voltage. Hang up Fail In existence of an authorized number, an unauthorized number dials up the unit.
Need help?
Do you have a question about the GPS103AB and is the answer not in the manual?
Questions and answers