• Up to 10 hours working time on a full charge • Easy to pair, no software installation required Key Functions Thank you for choosing the TaoTronics TT-BA07 US UK CA Wireless 2-in-1 Adapter. Please read this guide Bluetooth Receiver Mode carefully and keep it in a safe place for future Connect the 3.5mm audio jack to a wired speaker, stereo, or...
5V DC Battery Capacity 160 mA TaoTronics Wireless 3.5mm Audio Cable 2-in-1 Adapter Working Hours Approx. 10 hours (Model: TT-BA07) (Receiver Mode) Working Hours Approx. 10 hours (Transmitter Mode) Charging Time 2 hours 1.79 x 1.28 x 0.37 in / Dimension (L x W x H) 4.55 x 3.25 x 0.95 cm...
Product Diagram Control Functions Function Operation When off, press and hold the Power Power On Button for 5 seconds When on, press and hold the Power Power Off Button for 5 seconds When powered on, press the Power Pairing Button twice to start pairing. Slide the Mode Switch to and from Mode Switch TX and RX...
Page 6
LED Indicators How to Use Charging LED Indicator Status 1. Connect the micro-USB end of the charging cable to the Charging Solid Red LED charging port of the Bluetooth adapter. 2. Plug the USB end of the charging cable to a USB charging LED Off Fully charged port or any active USB port.
Page 7
On > Scan for devices 2. Turn off the Bluetooth function on your rst device, tap the 2. Find “TaoTronics TT-BA07” in the search results and tap on it to Power Button twice to pair and connect to your second connect.
Please recharge it and make sure the adapter has enough 2. Turn on the Bluetooth of the rst device, now TT-BA07 adapter battery power. Plug the unit to a charger and see if the LED is successfully paired with both devices.
No return will be accepted without seller authorization. Can I use the TT-BA07 adapter while it is charging? Statement Yes, the adapter is designed to be used while charging. The internal circuit is protected from over-charging.
Page 10
• Bis zu 10 Stunden Betriebsdauer mit einer einzigen Aufladung • Einfaches Verbinden, keine Softwareinstallation notwendig Hauptfunktionen Vielen Dank, dass Sie sich für den TaoTronics TT-BA07 kabellosen 2-in-1 Adapter entschieden haben. Bitte Bluetooth Empfängermodus lesen Sie diese Anleitung aufmerksam und bewahren Schließen Sie den 3,5 mm Audiostecker an einen verkabelten...
Page 11
5V DC Akkukapazität 160mA Betriebsdauer Ungefähr 10 Stunden TaoTronics kabelloser 3,5 mm Audiokabel (Empfängermodus) 2-in-1 Adapter (Modell: TT-BA07) Betriebsdauer Ungefähr 10 Stunden (Sendermodus) Au adungszeit 2 Stunden Dimensionen(L x B x H) 4,55 x 3,25 x 0,95 cm Gewicht 13,8 g...
Page 12
Produktdiagramm Bedienung Funktion Aktion Einschalttaste 5 Sekunden Einschalten lang gedrückt halten Einschalttaste 5 Sekunden Ausschalten lang gedrückt halten Einschalttaste zweimal Verbindungsmodus drücken Modusschalter auf Empfängermodus(RX) Modus wechseln oder Sendermodus(TX) stellen Im RX-Modus, Einschalttaste Wiedergabe/Pause drücken für Musikwiedergabe bzw. Pause ① LED-Anzeige ②...
Page 13
Hinweis: Hinweis: • Bei der ersten Benutzung aktiviert der Adapter nach dem • Der Modus kann nur geändert werden, wenn der Adapter für Einschalten automatisch den Verbindungsmodus. mindestens 3 Sekunden lang ausgeschaltet ist. Nach dem Anweisungen zum Herstellen einer Bluetoothverbindung Umschalten werden die Verbindungsinformationen zu nden Sie im folgenden Abschnitt.
Page 14
Verbinden 2. Zum Herstellen einer Verbindung wählen Sie „TaoTronics Verbinden im TX-Modus: TT-BA07“ aus den Suchergebnissen aus. Sobald die Verbindung hergestellt ist, leuchtet die LED blau. 1. Schalten Sie Bluetooth auf Ihrem Gerät ein. Achten Sie darauf, Hinweis: dass Adapter und Gerät nicht weiter als 90 cm voneinander •...
Page 15
„Verbinden“ beschrieben. 3. Schalten Sie die Bluetoothfunktion auf dem ersten Gerät ein. 2. Schalten Sie die Bluetoothfunktion auf dem ersten Jetzt ist der TT-BA07 erfolgreich mit beiden Geräten (verbundenen) Gerät aus, und drücken Sie zweimal die verbunden. Einschalttaste zum Herstellen der zweiten Verbindung.
Kann ich den TT-BA07 während des Au adens benutzen? voneinander entfernt sind. Ja, der TT-BA07 ist für die Verwendung während des Au andes konstruiert. Die internen Schaltkreise sind vor dem Überladen • Sich Ihr Gerät im Verbindungsmodus befindet, zu erkennen an der abwechselnd rot und blau blinkenden LED-Anzeige.
Garantie Rücksendungen ohne Autorisierung des Händlers werden nicht akzeptiert. Dieses Produkt wird von der 12 montigen TaoTronics Einzelteile- und Verarbeitungsgarantie abgedeckt, gültig ab dem original Kontaktieren Sie uns Kaufdatum. Falls das Produkt aufgrund eines Herstellungsfehlers Wenn Sie Fragen haben oder Ihren Garantieanspruch geltend defekt sein sollte, kontaktieren Sie bitte unverzüglich den machen wollen schreiben Sie uns bitte eine E-mail unter TaoTronics Kundendienst (per E-Mail...
• Facile à appairer, aucune installation logicielle requise Fonctions Clés Merci d’avoir choisi l’Adaptateur 2-en-1 Sans- l TaoTronics TT-BA07.Veuillez lire ce guide attentivement Mode Récepteur Bluetooth et le conserver dans un endroit sûr pour toute future Connectez le jack audio 3.5mm à un haut-parleur laire, une référence.
5V DC Capacité de batterie 160mA Adaptateur Sans- l Câble Audio 3.5mm 2-en-1 TaoTronics Autonomie Environ 10 heures (Modèle : TT-BA07) (mode récepteur) Autonomie Environ 10 heures (mode transmetteur) Temps de chargement 2 heures 4.55 x 3.25 x 0.95 cm / Dimensions(L x L x H) 1.79 x 1.28 x 0.37 in...
Description du Produit Fonctions de Contrôle Fonction Opération Appareil éteint, appuyez et maintenez le Bouton Allumage d’Alimentation pendant 5 secondes. Appareil allumé, appuyez et maintenez le Bouton Extinction d’Alimentation pendant 5 secondes. Appareil allumé, appuyez deux fois sur le Bouton d’Alimentation Couplage pour lancer le couplage.
Page 21
Note: Note: • A la première utilisation, une fois allumé, l’adaptateur va • Le mode ne peut être basculé qu’après que l’appareil ait été automatiquement entrer en mode couplage. Veuillez suivre allumé depuis 3 secondes. Après la bascule, l’historique de les instructions suivantes pour le couplage.
Page 22
On > Scanner les appareils 1. Activez le Bluetooth sur votre appareil ; assurez-vous que 2. Trouvez « TaoTronics TT-BA07 » dans les résultats de la l’adaptateur et l’appareil soient dans un rayon d’1 recherche et cliquez dessus pour vous y connecter. Une fois mètre / 3 pieds.
1. Suivez les instructions précédentes de la section « Couplage 2. Activez le Bluetooth sur le premier périphérique, l’adaptateur » pour coupler le TT-BA07 avec votre premier périphérique. TT-BA07est maintenant successivement appairé avec les deux périphériques. 2. Coupez la fonction Bluetooth de votre premier périphérique, Note: puis appuyez deux fois sur le Bouton d’Alimentation pour le...
Page 24
Diagnostic • Votre système audio est connecté à l’adaptateur via un câble audio de 3.5mm Mon adaptateur ne s’allume pas. • Assurez-vous du niveau sonore de la musique sur votre Veuillez le recharger et assurez-vous que l’adaptateur ai appareil Bluetooth et votre système audio suf samment de batterie.
Pour plus d’information, veuillez visiter www.taotronics.com. fabrication, veuillez contacter immédiatement l’assistance technique TaoTronics (support.fr@taotronics.com) a n de Déclaration lancer une réclamation. Nous vous guiderons sur la marche à suivre a n de nous retourner l'appareil défectueux pour Nous fournissons uniquement un service après vente pour les réparation et remplacement.
• Fácil de conectar, sin instalar software. Gracias por elegir usted el adaptador inalámbrico Funciones de las teclas 2-en-1 TaoTronics TT-BA07. Lea esta guía con cuidado y Modo de receptor Bluetooth guárdelo en un lugar seguro para futuras consultas. Si necesitamás ayuda, póngase en contacto con nuestro...
160 mA batería Horas de trabajo Aprox. 10 horas Adaptador inalámbrico 2-en-1 Cable de audio (modo de receptor) de TaoTronics (Modelo: TT-BA07) de 3,5 mm Horas de trabajo Aprox. 10 horas (modo de transmisor) Tiempo de carga 2 horas 1.79 x 1.28 x 0.37 in / Dimensión(L xWxH)
Diagrama del producto Funciones de control Función Operación Cuando está apagado, pulse y mantenga pulsado el botón Encender de encendido durante 5 segundos Cuando está activado,pulse y mantenga pulsado el botón Apagado de encendido durante 5 segundos Una vez encendido, pulse el botón de encendido dos Emparejamiento veces par ainiciar el...
Nota: Nota: • Para el primer uso, una vez encendido, el adaptador entrará • El modo sólo se puede conectar con éxito después de que automáticamente en el modo de emparejamiento. Por favor, el adaptador está apagado durante 3 segundos. Después siga las siguientes instrucciones sobre cómo emparejar.
Page 30
Activar>Buscar dispositivos. 1. Encienda el Bluetooth en el dispositivo; asegúrese de que el 2. Encontrar "TaoTronics TT-BA07" en los resultados de adaptador y el dispositivos e colocan dentro de un metro búsqueda y pulse sobre él para conectar. Una vez de alcance (3 pies).
2. Encender el Bluetooth del primer dispositivo, ahora el 2. Desactive la función Bluetooth en el primer dispositivo, adaptador de TT-BA07 está emparejado con éxito con presiona el botón de encendido dos veces para vincular y ambos dispositivos. conectara su segundo dispositivo.
Conecte la unidad a un cargador y modo de salida de la música observe si el indicador LED se vuelve rojo. Tengo problemas de emparejamiento conexión con otros ¿Puedo utilizar el adaptador TT-BA07 mientras se está dispositivos Bluetooth. cargando? Por favor, compruebe lo siguiente: Sí, el adaptador está...
Page 33
Garantía Contáctenos Este producto está cubierto con garantía TaoTronics, tanto las Para obtener ayuda, consultas y reclamaciones de garantía piezas como la mano de obra durante 12 meses a partir de la por favor mándenos un correo electrónico a support.es@taotronics.com con su número de orden de fecha de la primera compra.
Funzioni Chiave Grazie per aver scelto l’Adattatore Wireless 2-in-1 Modalità Ricevitore Bluetooth TaoTronics TT-BA07. Vi invitiamo a leggere il seguente Collegare il jack audio da 3.5mm ad un altoparlante cablato, manuale con attenzione e a conservarlo per future consultazioni. Per ulteriore assistenza, contattare il nostro stereo, o impianto stereo dell’auto per dare funzionalità...
Potenza di Ricarica 5V DC Capacità della Batteria 160 mAh TaoTronics Adattatore Cavo Audio da 3.5mm Wireless 2-in-1 Ore di Funzionamento (Modello: TT-BA07) Approx. 10 ore (Modalità Ricevitore) Ore di Funzionamento Approx. 10 ore (Modalità Trasmettitore) 2 ore Tempo di Carica 4.55 x 3.25 x 0.95 cm...
Schema del Prodotto Funzioni di Controllo Funzione Operazione Se spento, tenere premuto il Acceso Pulsante di Accensione per 5 secondi Se acceso, tenere premuto il Spento Pulsante di Accensione per 5 secondi Se acceso, premere due volte Accoppiamento il Pulsante di Accensione per associare il dispositivo.
Nota: Nota: • Per il primo uso, una volta alimentato, l’adattatore entrerà • E’ possible cambiare modalità solo dopo aver spento automaticamente in modalità associazione. Seguire le l’adattatore per 3 secondi. Dopo il cambio di modalità, la istruzioni riportate di seguito per associare il dispositivo. cronologia di associazione verrà...
Page 38
Associazione 2. Fare tap su “TaoTronics TT-BA07” tra i risultati della ricerca per Associazione in Modalità TX: collegarsi. Una volta connessi, il LED di noti ca sarà blu e rimarrà sso per tutto il tempo. 1. Attivare il Bluetooth nel proprio dispositivo; assicurarsi che...
1. Seguire le precedenti istruzioni nella sezione “Associazione” e non lasciare cadere l'adattatore su super ci dure. per associare il TT-BA07 al tuo primo dispositivo. Disattivare la • Non pulire il prodotto con sostanze chimiche o detergenti. funzione Bluetooth nel tuo primo dispositivo, fare tap sul •...
Sto avendo dif coltà ad associare e a collegare il mio È possibile utilizzare il TT-BA07 quando è sotto carica? dispositivo elettronico Bluetooth. Certo, l'adattatore è progettato per essere usato mentre si trova Assicurarsi di quanto segue: in carica.
Page 41
2. Dispositivo danneggiato da abuso e utilizzo improprio. 3. Dispositivo danneggiato da sostanze chimiche, fuoco, sostanze radioattive, veleni o liquidi. 4. Dispositivo danneggiato in seguito a disastri naturali. 5. Dispositivo danneggiato da terze parti, persone, oggetti ecc. Per la restituzione del prodotto, è necessaria l'autorizzazione del venditore Nota Uf ciale Contatti...
TECHNOLOGY ENHANCES LIFE FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must withstand any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the TT-BA07 and is the answer not in the manual?
Questions and answers