English
6
8
Pull the wires out of the motor unit and remove the
battery (Fig. 8).
Be careful, the battery strips are sharp.
Do not put the shaver back into the plugged-in Power Pod after you
have removed the battery.
guarantee & service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone number in the
worldwide guarantee leaflet). If there is no Consumer Care Centre in
your country, go to your local Philips dealer.
guarantee restrictions
The shaving heads (cutters and guards) are not covered by the terms of
the international guarantee because they are subject to wear.
Frequently asked questions
Why doesn't the shaver shave as well as it used to?
-
The shaver may not be properly clean. Switch on the shaver and
immerse the shaving unit in hot water with some liquid soap (see
chapter 'Cleaning and maintenance').
-
The shaving heads may be damaged or worn. Replace the shaving
unit (see chapter 'Replacement').
Why doesn't the shaver work when I press the on/off button?
-
The battery may be empty. Recharge the battery (see chapter
'Charging').
-
The travel lock may be activated. Press the on/off button for 3
seconds to deactivate the travel lock.
-
The shaving unit is soiled or damaged to such an extent that the
motor cannot run. In this case, the shaving unit symbol, the tap
symbol and the exclamation mark flash. When this happens, you have