Olympus Stylus Verve M-mini Digital Advanced Manual page 34

Changing ISO sensitivities
Press
ISO sensitivity and press the OK/
MENU button.
The selected ISO sensitivity is set.
Press the OK/MENU button again to exit
the menu.
1
Take the pictures.
The higher ISO sensitivity setting you select, the higher noise level the
picture has.
The ISO sensitivities are measured based on silver-halide films but the
figures are approximate.
When [ISO] is set to [AUTO] and a picture is taken in a dark place without
using the flash, the camera automatically sets to a high shutter speed in
order to avoid camera shake.
When [ISO] is set to [AUTO] and the subject is so far as the flash light does
not reach it the camera automatically raises the ISO sensitivity.
34
or to select a desired
ESP/n AUTO
DRIVE 64
ISO 100
DIGITAL ZOOM 200
AF MODE 400